(2)
Put the sidewall panel (4) in position on the structure (1) and make sure that the holes align.
(3)
Install the screws (5) together with the washers (6) in the sidewall panel (4).
(4)
Apply a bead of sealant SEALANTS (Material No. 09-018) around the edges of the sidewall panel (4) and the bearings (62) and (72).
(5)
After the sealant is dry, apply STRUCTURE PAINTS (Material No. 16-003) around the edges of the sidewall panel (4) and the bearings (62) and (72).
(6)
Install the access panels 147BB and 147CB.
R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-51Page 438 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1
(7)
Close the left main gear main door (Ref. TASK 32-12-00-410-001).
(8)
Close the access door 195BB.
(9)
Remove the safety barriers.
R 1EFF : 062-099, 106-149, 151-199, 204-299, 1 29-22-51Page 439 1301-399, 401-499, 1Config-1 Aug 01/05 1 1 1CES 1 **ON A/C 001-049, 051-061, 101-105, 201-203,
TASK 29-22-51-000-002 Removal of the RAT Hydraulic Pump WARNING : PUT THE SAFETY DEVICES AND THE WARNING NOTICES IN POSITION BEFORE YOU
_______ START A TASK ON OR NEAR:
-
THE FLIGHT CONTROLS
-
THE FLIGHT CONTROL SURFACES
-
THE LANDING GEAR AND THE RELATED DOORS
-COMPONENTS THAT MOVE. WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______ CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
WARNING : MAKE SURE THAT THE RAT TRAVEL RANGE IS CLEAR BEFORE YOU
_______ EXTEND/RETRACT THE RAT.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job__________________ Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------
REFERENCE QTY DESIGNATION
-------------------------------------------------------------------------------
No specific blanking caps
No specific blanking plugs
No specific circuit breaker(s) safety clip(s)
No specific container 4.0 l (1.0566 USgal)
1EFF : 001-049, 051-061, 101-105, 201-203, 1 29-22-51Page 440 1 1 Config-1 Aug 01/05R 1 1 1CES 1
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action 29-00-00-910-002 Safety Procedures of the Hydraulic System 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-22-00-869-001 Extension of the Ram Air Turbine (RAT) on the Ground 29-22-51-991-006 Fig. 405
3. Job Set-up
__________ Subtask 29-22-51-860-055
A. Aircraft Maintenance Configuration
WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.
_______
(1)
Obey the hydraulic safety procedures (Ref. TASK 29-00-00-910-002).
(2)
Put the safety barriers in position.
(3)
Put the warning notice(s) in position to tell persons not to pressurize the Blue hydraulic system:
-In the cockpit on the hydraulic section 40VU of the overhead panel,
-On the ground service panel of the Blue hydraulic system.
(4)
Depressurize the Blue hydraulic system and put it in the maintenance configuration (Ref. TASK 29-00-00-864-001).
(5)
Depressurize the reservoir of the Blue hydraulic system (Ref. TASK 29-14-00-614-001).
(6)
Extend the ram air turbine (RAT) (Ref. TASK 29-22-00-869-001).
(7)
Put a container below the hydraulic connections.
1EFF : 001-049, 051-061, 101-105, 201-203, 1 29-22-51Page 441 1 1 Config-1 Aug 01/05R 1 1 1CES 1
Subtask 29-22-51-865-058
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------106VU CSM/G /EV/MAN/SPLY 6XE B04 121VU HYDRAULIC/RAT/SPLY/EXTN/SOL1 2803GE P33
**ON A/C 001-049, 051-061, 101-102, 201-202,
121VU HYDRAULIC/RAT/CTL 2801GE P32 **ON A/C 103-105, 203-203,
121VU HYD/RAT/CTL 2801GE P32 **ON A/C 001-049, 051-061, 101-105, 201-203,
4. Procedure
_________
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM HYDRAULIC POWER 液壓6(18)
