(10)
Make sure that the electrical connectors are clean and in the correct condition.
(11)
Connect the electrical connector (1). Subtask 29-32-11-865-057
B.
Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 61GG
Subtask 29-32-11-790-053
C. Leak Test of the Hydraulic Connections
(1)
Pressurize the reservoir of the Yellow hydraulic system (Ref. TASK 29-14-00-614-002).
(2)
Pressurize the Yellow hydraulic system (Ref. TASK 29-10-00-863-002).
(3)
Examine the connection of the hydraulic pressure transducer and make sure that there are no leaks.
(4)
Depressurize the Yellow hydraulic system (Ref. TASK 29-10-00-864-002).
1EFF : ALL 1 29-32-11Page 433 1 1 Aug 01/05R 1 1 1CES 1
Subtask 29-32-11-710-053
D. Do the operational test of the alternate braking system without anti skid (Ref. TASK 32-43-00-710-001).
5. Close-up
________ Subtask 29-32-11-860-055
A. Put the aircraft back to the serviceable condition.
(1)
Remove the container.
(2)
Connect the isolation coupling of the Power Transfer Unit (PTU) (Ref. TASK 29-23-00-860-002).
(3)
Remove the warning notice(s). Subtask 29-32-11-410-053
B.
Close Access
(1)
Make sure that the work area is clean and clear of tool(s) and other items.
(2)
Close the main door of the main gear (Ref. TASK 32-12-00-410-001).
1EFF : ALL 1 29-32-11Page 434 1 1 Aug 01/05R 1 1 1CES 1
PRESSURE SWITCH - SYSTEM (1151GN,2151GN,3151GN) - REMOVAL/INSTALLATION
______________________________________________________________________
TASK 29-32-12-000-001
Removal of the System Pressure Switch (1151GN)
WARNING : MAKE SURE THAT THE TRAVEL RANGES OF THE FLIGHT CONTROL SURFACES ARE
_______ CLEAR BEFORE YOU PRESSURIZE/DEPRESSURIZE A HYDRAULIC SYSTEM.
WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking cap No specific blanking plugs No specific circuit breaker(s) safety clip(s) No specific container No specific warning notices No specific access platform 2.8 m (9 ft. 2 in.)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
Configuration before Maintenance Action 29-00-00-910-002 Safety Procedures of the Hydraulic System 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-23-00-860-001 Disconnection of the Isolation Coupling of the Power
Transfer Unit (PTU) 32-12-00-010-001 Open the Main Gear Doors for Access 29-32-12-991-001 Fig. 401
3. Job Set-up
__________
Subtask 29-32-12-010-050
A. Open one main door of the main gear (Ref. TASK 32-12-00-010-001).
Subtask 29-32-12-865-050
B. Open, safety and tag this(these) circuit breaker(s):
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM HYDRAULIC POWER 液壓6(144)
