R Yellow Engine Pump (Vickers) Figure 401/TASK 29-13-51-991-300
1EFF : 1 1 1CES ALL 1 111 29-13-51 Page 405 May 01/05
R (9) Remove and discard the gasket (45) from the mount pad.
R (10) Remove the packing (40) from the pump input splined-shaft and discard
R the packing (40).
R (11) Put protective covers on the end of the hose/tube assemblies, the
R unions, the unions/reducers, the pump and the electrical connector.
R (12) Put blanking plugs on the open end of the pump and on the gearbox
R mount pad.
TASK 29-13-51-400-004
Installation of the Yellow Engine Pump (3030GD)
WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES._______
WARNING : DO NOT TOUCH THE HYDRAULIC SYSTEM COMPONENTS FOR A SHORT TIME AFTER_______ THE ENGINE IS SHUTDOWN. THE ENGINE COMPONENTS STAY HOT FOR SOME TIME AND CAN CAUSE INJURY.
CAUTION : DO NOT LET HYDRAULIC FLUID FALL ON THE ENGINE. UNWANTED HYDRAULIC_______ FLUID MUST BE REMOVED IMMEDIATELY WITH A CLEAN LINT FREE CLOTH. THE FLUID CAN CAUSE DAMAGE TO THE SURFACE PROTECTION AND TO SOME PARTS.
1. Reason for the Job__________________
Self Explanatory
2. Job Set-up Information______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
R R R R R No specific No specific No specific No specific No specific No specific No specific warning notice(s)access platform 1.50 m (4 ft. 11 in.)container 5 l (1.3208 USgal)container 8 l (2.1133 USgal) Torque Wrench : range 96.00 to 900.00 lbf.in (1.00 to 10.00 m.daN) Torque Wrench : range 180.00 to 1800.00 lbf.in (2.00 to 20.00 m.daN)Torque Wrench : range 0.20 to 3.60 m.daN (2.00 to 26.00 lbf.ft)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 02-003 F NSA 307110 TYPE 4 HYDRAULIC FLUID (PHOSPHATE ESTER BASE) (Ref. 20-31-00)
C. Expendable Parts
-------------------------------------------------------------------------------
FIG.ITEM |DESIGNATION |IPC-CSN
-------------------------------------------------------------------------------
30 packing 29-13-51 02A-040
R 40 packing 29-13-51 01 -140 45 gasket 29-13-51 02A-020 55 packing 29-13-51 02A-060 60 packing 29-13-51 02A-090
D. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
12-12-29-611-001 Fill the Hydraulic Fluid Reservoir with a Hand Pump
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the
External Power
24-41-00-862-002 De-energize the Aircraft Electrical Circuits Supplied
from the External Power
29-10-00-710-001 Operational Check of Hydraulic Fire Shut Off Valves
and Associated Indicating System
29-13-00-710-002 Operational Test of the Yellow Hydraulic System
29-14-00-614-001 Depressurization of the Hydraulic Reservoirs
29-14-00-614-002 Pressurization of the Hydraulic Reservoirs through
the Ground Connector
29-23-00-863-002 Pressurize the Yellow Hydraulic System from the Green
Hydraulic System through the PTU with the Ground
Service Cart
29-24-00-864-001 Depressurize the Yellow Hydraulic System
31-60-00-860-001 EIS Start Procedure
31-60-00-860-002 EIS Stop Procedure
71-13-00-010-040 Opening of the Fan Cowl Doors
71-13-00-410-040 Closing of the Fan Cowl Doors
78-31-00-710-042 Operational Test of the Thrust Reverser System
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機(jī)維護(hù)手冊 AMM HYDRAULIC POWER 液壓4(91)
