曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

possible. (Strategic Planning Guidance: “Swiftly defeat adversaries in overlapping military campaigns
while preserving for the President the option to call for a more decisive and enduring result in one of the
two.”)
UA would be used against heavily defended targets for two reasons. First, a UA can theoretically achieve
levels of survivability that manned aircraft cannot. Signature control without the need for human
caretaking becomes less difficult, and maneuverability could be increased beyond human tolerances
should that be required to enhance survivability. The design driver for this case is survivability, however
it is achieved. If such survivability measures fail, the use of a UA removes the risk of losing a human life.
Previously, DoD has tended toward multi-mission configurations where one platform would accomplish
both/many missions (e.g., the multi-mission platform). It should be noted that a UA designed to be cost
effective for both lightly and heavily defended targets would be of sufficient size that it would no longer
be a low cost solution. A trade analysis would be required to determine if one multi-mission UA should
be procured, or if a range of separate UA for each mission is a better value.
If a UA are to reduce the numbers of manned strike assets required, it will have to offer a weapons
compatibility mix similar to that of manned strike assets in order to keep overall armament development
and support costs low. Additionally, UA must be examined for every opportunity to further reduce
operations and support costs. Operational data is available for many UA as a result of OEF and OIF.
Analysis is required to determine where savings can be achieved, or how they could be achieved if proper
Doctrine, Organization, Training, Materiel, Leadership, Personnel and Facilities (DOTMLPF) is applied.
J-UCAS should conduct such an analysis as part of its Operational Assessment to ensure the program
implements these lessons learned during its system development and demonstration phase.
SEAD may be analyzed as two different types of missions. The first is pre-emptive SEAD, in which a
pathway is cleared prior to the ingress of strike aircraft. The other type is reactive SEAD, in which the
SEAD asset must react rapidly to “pop-up” enemy air defense threats during the execution of a strike.
Since closing with that threat will be required, the survivability of the vehicle must be assured through a
combination of speed, stealth technology, and/or high maneuverability.
Execution of both the pre-emptive and the reactive SEAD mission imply several critical design criteria
for the UA platform and mission control system. These attributes would be similar to those of a UA in a
strike roll against heavily defended targets. UA accomplishing pre-emptive SEAD missions would also
be expected to possess the following system characteristics:
􀂾 Extremely high mission reliability, as follow-on force assets (many of which will be manned) will
depend upon the protection of a SEAD UA asset.
UAS ROADMAP 2005
APPENDIX A – MISSIONS
Page A-6
􀂾 Battle damage assessment (BDA) so operational commanders can properly determine whether strike
“go/no-go/continue” criteria have been met.
• If BDA is organic this reduces the reliance on other systems outside the SEAD UA platform, but
puts other design requirements on the SEAD UA that complicate signature control.
• If BDA is not organic then this simplifies the SEAD UA design requirements, but complicates the
integration of other ISR capabilities as a family of systems attempting to achieve effect in the
SEAD mission.
􀂾 Weapons optimized for concept of employment. If using direct attack munitions (short range), then a
robust signature reduction design, or stand-off weapons with appropriate support from on-board or
off-board sensors to find, fix, track and target intended threats must be employed.
􀂾 The use of direct attack munitions is a major cost avoidance compared to the integration and use of
stand-off weapons.
􀂾 However, stand-off weapons provide an opportunity to relax signature design requirements and thus
avoid significant low-observable costs.
Execution of the reactive SEAD mission implies further design criteria:
􀂾 Enemy defensive systems’ operations must be detected rapidly implying an onboard capability to
detect threats, or a well integrated system of systems.
􀂾 Reaction time from detection to neutralization of the enemy defenses must be very short (seconds).
􀂾 When using weapons to neutralize defenses, the flight time of the weapon must be reduced by the
ability to stand in close to the target (high survivability) or by the use of a high-speed weapon.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：unmanned aircraft systems roadmap(51)