曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

TASK 27-09-31-000-802
4. Flight Controls Shutoff Valve Motor Removal
(Figure 401)
A. General
(1) You can remove the valve motor with the valve installed in the flight controls hydraulic module.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-09-31
Page 407
Feb 10/2006
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
B. References
Reference Title
32-00-01-480-801 Landing Gear Downlock Pins Installation (P/B 201)
C. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
211 Flight Compartment - Left
212 Flight Compartment - Right
D. Prepare for the Removal
SUBTASK 27-09-31-480-002
WARNING: MAKE SURE THE DOWNLOCK PINS ARE INSTALLED ON ALL THE LANDING GEARS.
WITHOUT THE DOWNLOCK PINS, THE LANDING GEARS COULD RETRACT AND
CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
(1) If the downlock pins are not installed on all the landing gears, do this task: Landing Gear
Downlock Pins Installation, TASK 32-00-01-480-801.
SUBTASK 27-09-31-860-015
(2) If you removed the left motor:
Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-2
Row Col Number Name
B 13 C00363 FLIGHT CONTROL SHUTOFF VALVES FLT CONT
SUBTASK 27-09-31-860-005
(3) If you removed the right motor:
Open this circuit breaker and install safety tag:
F/O Electrical System Panel, P6-2
Row Col Number Name
C 13 C01074 FLIGHT CONTROL SHUTOFF VALVES FLT CONT
E. Flight Controls Shutoff Valve Motor Removal
SUBTASK 27-09-31-020-002
(1) Remove the valve motor [6]:
(a) Disconnect the electrical connector [1] from the valve motor [6].
(b) Set the manual override lever on the valve motor [6] to position 2.
(c) Remove the screws [7] that attach the valve motor [6] to the valve [8].
(d) Remove the valve motor [6] from the valve [8].
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-09-31
Page 408
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-09-31-400-802
5. Flight Controls Shutoff Valve Motor Installation
(Figure 401)
A. General
(1) You can install the valve motor with the valve installed in the flight controls hydraulic module.
B. References
Reference Title
27-09-31-710-801 Flight Controls Shutoff Valve Test (P/B 501)
SWPM 20-60-03 Standard Wiring Practices Manual
C. Consumable Materials
Reference Description Specification
G01912 Lockwire - Monel (0.032 In. Dia.) NASM20995N~
C32
(QQ-N-281)
G50171 Compound - Corrosion Inhibiting Compound,
Interior Application - D5026NS or ZC-026
D. Location Zones
Zone Area
133 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Left
134 Main Landing Gear Wheel Well, Body Station 663.75 to Body Station
727.00 - Right
211 Flight Compartment - Left
212 Flight Compartment - Right
E. Flight Controls Shutoff Valve Motor Installation
SUBTASK 27-09-31-420-003
(1) Install the valve motor [6]:
(a) Make sure the manual override lever on the valve motor [6] is set to position 2.
(b) Set the valve motor [6] on the valve [8]
(c) Engage the valve motor [6] with the valve cam.
(d) Install the four screws [7].
(e) Install the lockwire, G01912 on the screws [7].
(f) Before you connect the electrical connector [1], examine the connector for corrosion.
WARNING: DO THE STEPS BELOW IF THE AIRPLANE OPERATES AT AIRPORTS WHERE
DEICING FLUID THAT CONTAIN POTASSIUM FORMATE IS USED. ALSO DO THE
STEPS FOR ALL AIRPLANES THAT YOU FOUND CORROSION IN THE
ELECTRICAL CONNECTORS IN THE MAIN WHEEL WELL. THE ELECTRICAL
CONNECTOR IS PART OF A SYSTEM THAT IS NECESSARY FOR SAFE FLIGHT.
(g) If there was corrosion, refer to (SWPM 20-60-03) to correct the problem.
(h) Apply the D5026NS or ZC-026 compound, G50171 to the connector (SWPM 20-60-03).
(i) Connect the electrical connector [1] to the valve motor [6].
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-09-31
Page 409
Oct 10/2005
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
F. Put the Airplane Back to Its Usual Condition
SUBTASK 27-09-31-860-006
(1) Set the manual override lever on the valve motor [6] to position 1.
SUBTASK 27-09-31-860-016
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊1(66)