曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(3) Do a test of the position of the aileron RIGHT balance tab:
NOTE: For all aileron tab measurements in this test, measure the distances from the LOWER
surface of the aileron tab at the tip of the trailing edge to the LOWER surface of the
aileron at the tip of the trailing edge.
(a) Set the aileron at the rig position (Figure 506).
NOTE: The aileron rig position is when the outboard edge of the aileron upper surface is
0.49 ±0.03 inch (12.4 ±0.8 millimeters) below the adjacent fixed lower trailing
edge surface.
(b) Measure the vertical distance from the tip of the outboard trailing edge of the aileron tab to
the tip of the adjacent aileron trailing edge.
GUN 101-122
1) Make sure the distance is 0.12 ±0.07 inch (3.05 ±1.8 millimeter).
GUN 001-099, 155-157, 201-999
2) Make sure the distance is 0.06 ±0.07 inch (1.5 ±1.8 millimeter).
GUN 101-122
(c) Manually move the aileron DOWN so that the tip of the outboard lower trailing edge of the
aileron is 3.63 ±0.01 inches (92.2 ±0.25 millimeters) below the tip of the lower trailing
edge of the adjacent fixed trailing edge surface.
GUN 001-099, 155-157, 201-999
(d) Manually move the aileron DOWN so that the tip of the outboard lower trailing edge of the
aileron is 3.39 ±0.01 inches (86.1 ±0.25 millimeters) below the tip of the lower trailing
edge of the adjacent fixed trailing edge surface.
GUN ALL
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-00
Page 568
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
(e) Measure the distance from the tip of the lower surface of the aileron tab to the tip of the
lower surface of the adjacent aileron trailing edge.
GUN 101-122
1) Make sure the aileron balance tab moves UP 0.92 ±0.01 inch (23.4 ±0.25 millimeters) .
GUN 001-099, 155-157, 201-999
2) Make sure the aileron balance tab moves UP 0.86 ±0.01 inch (21.8 ±0.25 millimeters) .
GUN 101-122
(f) Manually move the aileron UP so that the tip of the outboard lower trailing edge of the
aileron is 4.35 ±0.01 inches (110.5 ±0.25 millimeters) above the tip of the lower trailing
edge of the adjacent fixed trailing edge surface.
GUN 001-099, 155-157, 201-999
(g) Manually move the aileron UP so that the tip of the outboard lower trailing edge of the
aileron is 4.59 ±0.01 inches (116.6 ±0.25 millimeters) above the tip of the lower trailing
edge of the adjacent fixed trailing edge surface.
GUN ALL
(h) Measure the distance from the tip of the lower surface of the aileron tab to the tip of the
lower surface of the adjacent aileron trailing edge.
GUN 101-122
1) Make sure the aileron balance tab moves DOWN 1.10 ±0.01 inch (27.9 ±0.25
millimeters) .
GUN 001-099, 155-157, 201-999
2) Make sure the aileron balance tab moves DOWN 1.16 ±0.01 inch (29.5 ±0.25
millimeters) .
GUN ALL
SUBTASK 27-11-00-860-097
(4) Do this task: Remove Electrical Power, TASK 24-22-00-860-812.
------------------------- END OF TASK ---------------------------
TASK 27-11-00-700-809
19. Aileron Travel Test
A. References
Reference Title
24-22-00-860-811 Supply Electrical Power (P/B 201)
24-22-00-860-812 Remove Electrical Power (P/B 201)
29-11-00-860-801 Hydraulic System A or B Pressurization (P/B 201)
29-11-00-860-805 Hydraulic System A or B Power Removal (P/B 201)
B. Tools/Equipment
NOTE: When more than one tool part number is listed under the same "Reference" number, the
tools shown are alternates to each other within the same airplane series. Tool part numbers
that are replaced or non-procurable are preceded by "Opt:", which stands for Optional.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-00
Page 569
Oct 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Reference Description
SPL-1670 Mount - Control Wheel Protractor
(Part #: F72790, Supplier: 81205, A/P Effectivity: 737-100, -200, -200C,
-300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800, -900, -900ER,
-BBJ)
SPL-1680 Protractor - Assembly, Control Column
(Part #: 4MIT65B80307-1, Supplier: 81205, A/P Effectivity: 737-100,
-200, -200C, -300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800,
-900, -900ER, -BBJ)
(Part #: A27021-29, Supplier: 81205, A/P Effectivity: 737-100, -200,
-200C, -300, -400, -500, -600, -700, -700C, -700ER, -700QC, -800, -900,
-900ER, -BBJ)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊1(128)