曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(Part #: F70207-109, Supplier: 81205, A/P Effectivity: 737-600, -700,
-700C, -700ER, -700QC, -800, -900, -900ER, -BBJ)
C. Location Zones
Zone Area
211 Flight Compartment - Left
212 Flight Compartment - Right
D. Access Panels
Number Name/Location
112A Forward Access Door
E. Prepare for the Removal
SUBTASK 27-11-41-860-001
WARNING: MAKE SURE THE DOWNLOCK PINS ARE INSTALLED ON ALL THE LANDING GEARS.
WITHOUT THE DOWNLOCK PINS, THE LANDING GEARS COULD RETRACT AND
CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
(1) Do this task: Remove Pressure from the Aileron Hydraulic Systems A and B,
TASK 27-11-00-860-801.
SUBTASK 27-11-41-862-001
(2) Do this task: Remove Electrical Power, TASK 24-22-00-860-812.
SUBTASK 27-11-41-860-002
(3) Make sure the aileron control wheels [3] are in the neutral position.
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-41
Page 401
Feb 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
SUBTASK 27-11-41-010-001
(4) Open this access panel:
Number Name/Location
112A Forward Access Door
SUBTASK 27-11-41-480-001
(5) Install the rig pin A/S-1 and A/S-1A, from the rig pin kit, SPL-1585, in the transfer mechanism
(Figure 401).
SUBTASK 27-11-41-480-002
(6) Install the rig pin A/S-15, from the rig pin kit, SPL-1585, in the aileron feel and centering unit
(Figure 401).
F. Aileron Control Wheel Removal
SUBTASK 27-11-41-020-001
(1) Remove the aileron control wheel [3] (Figure 402):
(a) Remove the screws [5] that attach the medallion [6] to the aileron control wheel [3].
(b) Remove the medallion [6] from the aileron control wheel [3].
(c) Remove the pin [10], nut [4], washer [8], washer [7], spacer [9] and bolt [11]. Discard the
pin [10].
(d) Remove the screws [12], and washers [13] to remove the terminal cover [16].
(e) Remove the screws [19], washers [18] and washers [20] to disconnect the wires from the
terminal block [17].
(f) Write down and make a mark of the configuration of the identified color wires.
(g) Remove the terminal block [17] from the hub of the wheel.
(h) Carefully remove the aileron control wheel [3] from the control column.
(i) Make a mark of the positions of the aileron control wheel [3] and the gear and sleeve
assembly [1].
(j) Make a mark on the wire bundle to identify the clamp [15] location in the control wheel hub.
(k) Remove the screw [14] to remove the clamp [15] from the aileron control wheel [3].
(l) Carefully disengage the wire bundle from the aileron control wheel [3].
SUBTASK 27-11-41-020-002
(2) If you want to remove the stabilizer trim control switch, do this task: Stabilizer Trim Control
Switch Removal, TASK 27-41-97-000-801.
SUBTASK 27-11-41-020-003
(3) If you want to remove the autopilot disengage switch, do this task: Autopilot Disengage Switch
Removal, TASK 22-11-41-000-801.
SUBTASK 27-11-41-020-004
(4) If you want to remove the control wheel PTT switch, do this task: Control Wheel PTT Switch
Removal, TASK 23-51-04-000-801.
------------------------- END OF TASK ---------------------------
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-41
Page 402
Feb 10/2007
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rig Pin Installation
Figure 401 (Sheet 1 of 2)/27-11-41-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-41
Page 403
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Rig Pin Installation
Figure 401 (Sheet 2 of 2)/27-11-41-990-801
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-41
Page 404
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Aileron Control Wheel Installation
Figure 402 (Sheet 1 of 2)/27-11-41-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-41
Page 405
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
Aileron Control Wheel Installation
Figure 402 (Sheet 2 of 2)/27-11-41-990-802
737-600/700/800/900
AIRCRAFT MAINTENANCE MANUAL
EFFECTIVITY
GUN ALL 27-11-41
Page 406
Oct 10/2003
D633A101-GUN
BOEING PROPRIETARY - Copyright#Unpublished Work - See title page for details
TASK 27-11-41-400-801
3. Aileron Control Wheel Installation
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-600/700/800/900 AIRCRAFT MAINTENANCE MANUAL飛機維護手冊1(158)