曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

it’s own master.
California Instruments 103
User Manual Compact i/iX Series
7.7 Factory Assistance
If the problem with the cabinet or one of the power modules cannot be isolated, contact the factory for
assistance.
7.8 Fuses
See Table 7-1 for replaceable fuses and ratings for each of the sub assemblies in the i/iX model
power source.
California Instruments 104
User Manual Compact i/iX Series
7.9 Replaceable Parts
In order to ensure prompt, accurate service, please provide the following information, when applicable
for e rep t part o
a. Model number and serial number of the instrument.
b. mponent is located. (California Instruments PART
#)
c. on ence d cable (REF #)
d. pon n
e.
All replaceable part orders should be addressed to:
California Instruments Corporation.
Attention: Custom
9689 Towne Centre Drive
San Diego, California 92121-1964
United States of America
Orders may also be placed using the following fax number: 1 858 677 0904 or via email:
support@calinst.com
ach lacemen rdered.
Part number for the sub-assembly where the co
Comp ent refer esignator if appli
Com ent descriptio .
Component manufacturers (VENDOR)
er Service
REF # Sub CI PART # DESCRIPTION MNF, P/N QTY
Common Assemblies
Top 6005-401-1 Top Assembly
S1 AC Line Switch 1
S2 AC Voltage Selector Switch 1
T1 6005-017 AC Input Transformer CI 1
L1 6005-018 PFC Inductor CI 1
F1 270176 AC Input Fuse, 20A, 250V, Slo blow Bussmann, ABC20 1
A3 6005-702-2 Keyboard / Display Assembly CI 1
A4 6005-703-1 Controller Assembly CI 1
A5 6005-705 Relay / Interface Assembly CI
A12 6005-404-1 PFC Heatsink Assembly CI 1
A6 6005-704-1 PFC Board Assembly CI 1
F1, F2 270181 Fuse, 2A, 125V Littlefuse, 251 002 2
B3 241186 Fan, 3”, 24Vdc Comair, CR0824HB-A70GL
Nidec, M33411-16 1
A7 250808 DC bias supply Lambda, SCD401515 1
A8 6005-706-1 AC Input Filter Board CI
A9 6005-400-1 Power Module Assembly CI 1
A1 6005-700-1 Amplifier Power Board CI 1
F1, F2 270238 Fuse, 5A, 250V Bussmann, GDA-5
Littlefuse, 216 005 2
California Instruments 105
User Manual Compact i/iX Series
REF # Sub CI PART # DESCRIPTION MNF, P/N QTY
A2 6005-701-1 Amplifier Control Board CI 1
B1 241186 Fan, 3”, 24Vdc Comair, CR0824HB-A70GL
Nidec, M33411-16 1
A10 6005-400-1 Power Module Assembly CI 0 or 1
A1 6005-700-1 Amplifier Power Board CI 1
F1, F2 270238 Fuse, 5A, 250V Bussmann, GDA-5
Littlefuse, 216 005 2
A2 6005-701-1 Amplifier Control Board CI 1
B2 241186 Fan, 3”, 24Vdc Comair, CR0824HB-A70GL
Nidec, M33411-16 1
Table 7-1: Replaceable Parts and Assemblies
California Instruments 106
User Manual Compact i/iX Series
8. Miscellanuous Options
8.1 IEEE488 Interface (-GPIB)
The GPIB interface is available on all iX Series models. It is also available as a factory installed op
on the “i” Series. The operation of the GPIB interface is the same on both “i” and “iX”series mod
For details on operation of the GPIB interface and programming command syntax, refer to the
Compact i/iX Series Programming manual, CI P/N 6005-961 provided in
tion
els.
PDF format on CD ROM
8.2 At
CIC496.
las Based Language Extensions (-ABL)
All Compact i/iX series model support the IEEE SCPI (Standard Commands for Programmable
Instruments) command language syntax for programming over the bus. (USB, GPIB or LAN). The –
r to the Compact i/iX Series Programming manual, CI
P/N 6005-961 provided in PDF format on CD ROM CIC496.
8.3 Ethernet Interface (-LAN)
ABL option provides backward compatability with programs written for certain older products from
other manufacturers.
For details on use the Atlas style syntax, refe
The Ethernet interface is available as a factory installed option on the Compact iX Series models.
mming command syntax, refer to the
provided in PDF format on CD ROM
8.4 Clock and Lock (–LKM / -LKS)
For details on operation of the Ethernet interface and progra
Compact i/iX Series Programming manual, CI P/N 6005-961
CIC496.
The –LKM and –LKS options are available on the iX Series AC power source models. This option
allows one or more auxiliary unit outputs to be phase synchronized to a master iX unit. In this
o
ed together cannot be paralleled to obtain
more current.
The Clock and Lock mode is provided for the creation of split phase or three phase systems.
For connection and operation information of the Clock and Lock mode, refer to section 3.10 of this
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：航空資料11(149)