曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費(fèi)者

the process of establishing and charting the first
RITTRs on IFR en route low altitude charts. The five
new RITTRs through Charlotte's Class B airspace took
effect on September 1, 2005, making them available
for pilots to file on their IFR flight plans. Additional
RITTRs are planned for Cincinnati, Ohio, and
Jacksonville, Florida.
The RITTRs allow IFR overflights through the Class
B airspace for RNAV-capable aircraft. Without the
RITTRS, these aircraft would be routinely routed
around the Class B by as much as 50 miles.
REQUIRED NAVIGATION PERFORMANCE
The continuing growth of aviation places increasing
demands on airspace capacity and emphasizes the need
for the best use of the available airspace. These factors,
along with the accuracy of modern aviation navigation
systems and the requirement for increased operational
efficiency in terms of direct routings and track-keeping
accuracy, have resulted in the concept of required navigation performance—a statement of the navigation
performance accuracy necessary for operation within a
defined airspace. Required Navigation Performance
(RNP) is a statement of the navigation performance
necessary for operation within a defined airspace. RNP
includes both performance and functional requirements, and is indicated by the RNP value. The RNP
value designates the lateral performance requirement
associated with a procedure. [Figure 1-11]
RNP includes a navigation specification including
requirements for on-board performance monitoring and
alerting. These functional and performance standards
allow the flight paths of participating aircraft to be both
predictable and repeatable to the declared levels of accuracy. More information on RNP is contained in subsequent chapters.
TERMINAL FINAL APPROACH
EN ROUTE
2.0 NM
1.0 NM
0.3 NM
2.0 NM
1.0 NM
0.3 NM
RNP 1.0 RNP 2.0 RNP 1.0 RNP 0.3
Departure Enroute Arrival Approach
Figure 1-11. Required Navigation Performance.
1-14
The term RNP is also applied as a descriptor for airspace, routes, and procedures — including departures,
arrivals, and instrument approach procedures (IAPs).
The descriptor can apply to a unique approach procedure
or to a large region of airspace. RNP applies to navigation
performance within a designated airspace, and includes
the capability of both the available infrastructure (navigation aids) and the aircraft. Washington National Airport
(KDCA) introduced the first RNP approach procedure in
September 2005. An example of an RNP approach chart
is shown in Figure 1-12.
Figure 1-12. RNP Approach Chart.
1-15
The RNP value designates the lateral performance
requirement associated with a procedure. The required
performance is obtained through a combination of aircraft capability and the level of service provided by the
corresponding navigation infrastructure. From a broad
perspective:
Aircraft Capability + Level of Service = Access
In this context, aircraft capability refers to the airworthiness certification and operational approval elements
(including avionics, maintenance, database, human
factors, pilot procedures, training, and other issues).
The level of service element refers to the NAS infrastructure, including published routes, signal-in-space
performance and availability, and air traffic management. When considered collectively, these elements
result in providing access. Access provides the desired
benefit (airspace, procedures, routes of flight, etc.).
A key feature of RNP is the concept of on-board monitoring and alerting. This means the navigation equipment is accurate enough to keep the aircraft in a specific
volume of airspace, which moves along with the aircraft.
The aircraft is expected to remain within this block of
airspace for at least 95 percent of the flight time.
Additional airspace outside the 95 percent area is provided for continuity and integrity, so that the combined
areas ensure aircraft containment 99.9 percent of the
time. RNP levels are actual distances from the centerline
of the flight path, which must be maintained for aircraft
and obstacle separation. Although additional FAA-recognized RNP levels may be used for specific operations,
the United States currently supports three standard RNP
levels:
• RNP 0.3 – Approach
• RNP 1.0 – Terminal
• RNP 2.0 – Terminal and En Route
RNP 0.3 represents a distance of 0.3 nautical miles
(NM) either side of a specified flight path centerline.
The specific performance required on the final approach
segment of an instrument approach is an example of this
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：Instrument Procedures Handbook (IPH)儀表程序手冊上(23)