FIG ITEM  PART.NUMBER  AIRLINE PART.NO  NOMENCLATURE 1234567  EFFECT CODE  UNITS PER ASSY 
7A 
1  148.00.090.00RF  FRONT STUD INSTL (NP) (REF FIG 7 FOR NHA)  RF 
.5  148.00.090.00  .FRONT STUD INSTL  2 
10  148.00.000.83  .STUD  1 
20  148.00.000.84  .BOLT  1 
30  148.00.000.85  .EXCENTER  1 
40  AN565A8H3  .SET SCREW (#042283) (FOR TORQUE REF TABLE 8001)  1 
50  104267  .PLATE SPRING 22,5X11,2X1,25 DIN2093  4 
60  148.00.000.86  .LID  1 
70  148.00.000.87  .HOUSING  1 
80  148.00.000.88  .SPRING  1 
90  315.00.300.05  .WASHER 10X16X0,5  1 
100  302.10.142.90  .LOCTITE 243 BLUE * * *  AR 

. ITEM NOT ILLUSTRATED Recaro Aircraft Seating GmbH & Co. KG, Daimlerstrasse 21, D.74523 Schw.bisch Hall

COMPONENT MAINTENANCE MANUAL . 6510A TYPE 654 SERIES
THIS PAGE INTENTIONALLY LEFT BLANK

Recaro Aircraft Seating GmbH & Co. KG, Daimlerstrasse 21, D.74523 Schw.bisch Hall
COMPONENT MAINTENANCE MANUAL . 6510A TYPE 654 SERIES
STORAGE (INCLUDING TRANSPORTATION)
1. STORAGE INSTRUCTIONS
A. Packaging Materials
NOTE: Equivalent substitutes may be used for listed items.

ITEM  SOURCE 
KRAFT WRAPPING PAPER  as per Fed. Spec. UU.P.271D Edwards Container Corp. Los Angeles. Calif. USA 
REINFORCED SEALING TAPE  as per Fed. Spec. PPP.T.76B Nashus Corp. Los Angeles, Calif. USA 

B. Packaging

NOTE: The seat assemblies are essentially corrosion.resistant. Thus, special preservation materials are not required under ordinary storage conditions
(1)Wrap seats with Kraft Paper (Federal specification UU.P.27 or equivalent) Seal all edges include the seat legs with reinforced sealing tape.
(2)Identify packaged seat assemblies by writing the assembly partnumber, serial number and repair date.
(3)Store packaged seat assemblies in a cool, dry area away from any heat
source, direct sunlight at a temperature of 100 . 350C (500 . 950F)

1. TRANSPORTATION
A. General Instructions

(1)
It is recommended to use the original standard RECARO packing system for transport, as it is well designed to meet the airline requirements. Refer to ATA Specification 300 for more details, if anything specifically requested.

(2)
The container shall be constructed of cardboard, fibreboard or plywood, providing sufficient protection with a minimum of tare weight. Do not use straps and buckles as closing devices. Two
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：COMPONENT MAINTENANCE MANUAL WITH ILLUSTRATED PARTS LIST B757−200 PASSENGER SEAT 乘客座椅(87)