曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

WARNING: MAKE SURE THAT THE ENGINE IS SAFE BEFORE YOU DO ANY WORK ON THE STARTER SYSTEM. IF THE ENGINE STARTS THE PROPELLER CAN CAUSE INJURY OR DEATH. 
(1)  Make sure that the engine is safe: S Set the ELECTRIC MASTER key switch to OFF. S Set the ENGINE MASTER switch to OFF. S Set the power lever to IDLE. 
(2)  Put the ENGINE MASTER switch in position in the instrument panel. 
(3)  Connect the cables to the ENGINE MASTER switch.  Refer to the wiring diagrams and the notes you made during removal. 
(4)  Move the ENGINE MASTER switch into position in the instrument panel. 
(5)  Install the retaining nut to the cockpit side of the ENGINE MASTER switch. 
(6)  Install the instrument panel cover.  Refer to Section 25-10. 
(7)  Connect the airplane main battery.  Refer to Section 24-34. 
(8)  Install the engine top cowling.  Refer to Section 71-11. 
(9)  Do an engine ground run-up.  Refer to Section 71-01. 

%

80-01-00
Starting
AMM

% 4. Remove/Install the Starter Relay
%
%

%
%
%
%
%
%
%
%
%
%
%
%

%
%
%

% A. Remove the Starter Relay %

Detail Steps/Work Items  Key Items/References 
WARNING: MAKE SURE THAT THE ENGINE IS SAFE BEFORE YOU DO ANY WORK ON THE STARTER SYSTEM. IF THE ENGINE STARTS THE PROPELLER CAN CAUSE INJURY OR DEATH. 
(1)  Make sure that the engine is safe: S Set the ELECTRIC MASTER key switch to OFF. S Set the ENGINE MASTER switch to OFF. S Set the power lever to IDLE. 
(2)  Remove the engine top cowling.  Refer to Section 71-11. 
(3)  Disconnect the airplane main battery.  Refer to Section 24-34. 
(4)  Remove the cover from the relay junction box. 
(5)  Disconnect the cables from the starter relay.  Make a note of the position of the cables. 
(6)  Remove the screw, washer and nut that attach the relay. 
(7)  Remove the starter relay from the airplane. 

%

Doc # 6.02.01 Page 205
Rev. 4 09 Jan 2003

80-01-00
AMM

% B. Install the Starter Relay % %
% % % %
% % % % %
% %
% %
% %
%
%
%

DA 40 Series

Detail Steps/Work Items  Key Items/References 
WARNING: MAKE SURE THAT THE ENGINE IS SAFE BEFORE YOU DO ANY WORK ON THE STARTER SYSTEM. IF THE ENGINE STARTS THE PROPELLER CAN CAUSE INJURY OR DEATH. 
(1)  Make sure that the engine is safe: S Set the ELECTRIC MASTER key switch to OFF. S Set the ENGINE MASTER switch to OFF. S Set the power lever to IDLE. 
(2)  Put the starter relay in position on the instrument panel shelf. 
(3)  Install the screw, washer and nut that attach the relay. 
(4)  Connect the cables to the starter relay.  Refer to the wiring diagrams and the notes you made during removal. 
(5)  Install the cover to the relay junction box. 
(6)  Connect the airplane main battery.  Refer to Section 24-34. 
(7)  Install the engine top cowling.  Refer to Section 71-11. 
(8)  Do an engine ground run-up.  Refer to Section 71-01. 

%

80-01-00
Starting
AMM

% 5. Remove/Install the Glow Relay
%
%

%
%
%
%
%
%
%
%
%
%
%
%

%
%
%

% A. Remove the Glow Relay %

Detail Steps/Work Items  Key Items/References 
WARNING: MAKE SURE THAT THE ENGINE IS SAFE BEFORE YOU DO ANY WORK ON THE STARTER SYSTEM. IF THE ENGINE STARTS THE PROPELLER CAN CAUSE INJURY OR DEATH. 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：鉆石40飛機維護手冊 DA 40 SERIES AMM 6(25)