% Group F Power Plant Chapters 71 - 81 A separation sheet divides each chapter. The separation sheet shows the number of the chapter and the title.
Doc # 6.02.01 Page 3
Rev. 4 09 Jan 2003
01-00-00
AMM
The main contents of each group of chapters is given below:
(1) Group A - Introduction
Chapter 1 tells you about the Airplane Maintenance Manual, and Chapter 2 tells you how to use the Airplane Maintenance Manual.
(2) Group B - Airplane General
Chapter 05 contains the Scheduled Maintenance Checklist. Some tasks require a maintenance procedure. The Scheduled Maintenance Checklist identifies the chapter in the manual that gives the maintenance procedure for the task. It also tells you where to find general information.
Chapters 06 to 10 tell you about general procedures such as towing, parking and weighing.
Chapter 11 tells you about the placards and markings which are important for operating the airplane.
Chapter 12 contains servicing tasks such as refueling and lubrication. It also contains data about cleaning.
(3) Group C - Airframe Systems
Chapter 20 contains the standard practices for airframe maintenance.
Chapters 21 to 37 tells you about the airframe systems. They include the avionics systems (such as communications (23)) and the mechanical systems (such as flight controls (27)).
Chapter 31 shows the location of the instruments. The chapter which is applicable to the system gives the details. For example, Chapter 27 gives the details for the flap position indicator.
(4) Group D - Structure
Chapter 51 contains data about the design of the airframe. It also gives instructions for minor repairs to the structure.
Chapters 52 to 57 tell you about each part of the structure.
Page 4 Doc # 6.02.01 09 Jan 2003 Rev. 4
01-00-00
Introduction
AMM
(5) Group E - Propeller
Chapter 61 contains the maintenance procedures for the propeller. Refer to the propeller manufacturer’s manual for other data.
(6) Group F - Power Plant
This group of chapters describes the engine and its systems which make the Power Plant. It contains the maintenance procedures for maintenance on the airplane. Refer to the engine manufacturer’s manual for other data.
C. Chapter Configuration
The first page of each Chapter shows the number of the chapter and the title. The second page shows the contents. Where applicable, each chapter and section contains the topics that follow:
) Description and Operation.
) Trouble Shooting.
) Maintenance Practices. Where applicable the Maintenance Practices give data on these procedures:
Servicing.
Removal and Installation.
Adjustment/Tests.
Checking/Testing.
Cleaning/Painting.
Repairs.
Doc # 6.02.01 Page 5
Rev. 4 09 Jan 2003
01-00-00
AMM
5. Page Numbering System
This manual uses the ATA 100 page block-numbering system. The page number is at the bottom on the outer edge. It is adjacent to the chapter/section number. Each topic in a section has numbers from these page blocks: ) Description and Operation - Pages 1 to 99. ) Trouble-Shooting - Pages 101 to 199. ) Maintenance Practices - Pages 201 to 299.
6. Figures
Figures are given numbers in sequence. The first Figure in a chapter or section is Figure 1.
7. Record of Revisions
This Airplane Maintenance Manual has a Record of Revisions. Use the Record of Revisions to show when changes were included in the Airplane Maintenance Manual.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：鉆石40飛機維護手冊 DA 40 SERIES AMM 1(25)
