25-51-07
 ú ú 06 Page 408 ú Dec 20/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
 AFT CARGO LOADER DRIVE MOTOR (ROTARY ACTUATOR) -
________________________________________________ REMOVAL/INSTALLATION
____________________
 1.  General_______
 A.  This procedure contains two tasks. The first task is the instruction to remove the drive motor. The second task is the instructions to install the drive motor.
 TASK 25-51-21-004-001
 2.  Remove the Drive Motor (Rotary Actuator) (Fig. 401)________________________________________
 A.  Access
 (1)  
Location Zones
 153 Aft Cargo Compartment (Left)
 154 Aft Cargo Compartment (Right)

 (2)  
Access Panel
 822 No. 2 Cargo Door

 B.  Procedure
 S 864-024
 (1)  
Open these circuit breakers on the APU external power panel, P34, and attach DO-NOT-CLOSE tags:

 (a)  
34A7, AFT CARGO LOADER CONT

 (b)  
34B16, AFT CARGO LOADER DRIVE

 (2)  
Open the access door on module 2.

 (3)
Disconnect the electrical connectors from the drive motor (1).

 (4)
Remove the nuts (4), the washers (3), and the mount bolts (2).

 (5)  
Remove the drive motor (1).

 S 014-002
 S 034-003
 S 034-004
 S 024-006
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH THE CARGO LOADER SYSTEM ú

 25-51-21
 ú ú 06 Page 401 ú Jun 20/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

LOADER
SEE
CARGO DOOR
1.

2.

3.
WASHER

4.
NUT MOTOR MOUNT

DRIVE SCREW

1. DRIVE MOTOR

MAKE SURE THE DRIVE SCREW SHAFT EXTENDS (ROTARY ACTUATOR)A MINIMUM OF 0.875 INCH MORE THAN THE
MOTOR MOUNT. THIS MAKES SURE THERE IS DRIVE SCREW
SUFFICIENT SPLINE ENGAGEMENT BETWEEN THE
DRIVE SCREW SHAFT AND THE DRIVE MOTOR

Aft Cargo Loader Drive Motor (Rotary Actuator) Installation
Figure 401

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH THE CARGO LOADER SYSTEM ú

 25-51-21
 ú ú 07 Page 402 ú Jun 20/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757 MAINTENANCE MANUAL
 TASK 25-51-21-404-007
 3. Install the Drive Motor (Rotary Actuator) (Fig. 401)
_________________________________________
 A. Parts
 ~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 1 | Drive Motor (Rotary Actuator) | 25-51-21| 01 | 105 | | | 2 | Mount Bolt | | | 10 | | | 3 | Washer | | | 15 | | | 4 | Nut | | | 17 | 2......…........…...................................…..........….....….........1
 B. References
 (1)  24-22-00/201, Electrical Power - Control
 C. Access
 (1)  
Location Zones
 153 Aft Cargo Compartment (Left)
 154 Aft Cargo Compartment (Right)

 (2)  
Access Panel
 822 No. 2 Cargo Door

 D. Procedure
 S 824-010
 (1)  
Make sure the set screw is in the up position and the load arm points forward (View A-A).

 S 824-011

 (2)  
Make sure the drive screw extends out from the motor mount the distance shown (View B).

 S 424-015

 (3)  
Install the drive motor (1) on the drive screw, with the splines on the drive screw aligned with the splines on the drive motor (1).

 (4)
Turn the drive motor (1) until the mount bolt holes are aligned.

 (5)  
Install the mount bolts (2), washers (3), and nuts (4).

 (6)
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 2(54)