(2)
Make sure the forward thrust levers are in the idle position.
S 864-003-N00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-11-01
ALL ú ú N01 Page 401 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
A-A
C-C
FWD
Turbine Exhaust Sleeve Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-11-01
ALL ú ú N01 Page 402 ú Oct 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
D-D FWD
Turbine Exhaust Sleeve Installation
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-11-01
ALL ú ú N01 Page 403 ú Oct 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
S 864-018-N00
(3)
Make sure the reverse thrust levers are in the fully down position.
S 494-019-N00
(4)
Attach a DO-NOT-OPERATE tag to the forward and the reverse thrust levers.
S 044-004-N00
WARNING: DO THE DEACTIVATION PROCEDURE TO PREVENT THE OPERATION OF THE
_______ THRUST REVERSER. THE ACCIDENTAL OPERATION OF THE THRUST REVERSER CAN CAUSE INJURIES TO PERSONS AND DAMANGE TO EQUIPMENT.
(5)
Do the deactivation procedure for the thrust reverser for ground maintenance (AMM 78-31-00/201).
S 014-005-N00
(6)
Open the core cowl panels (AMM 71-11-06/201).
S 494-006-N00
(7)
Install the cradle on the sleeve:
(a)
Attach the cradle to the sleeve.
(b)
Adjust the cradle to hold the weight of the sleeve.
S 024-020-N00
(8) Remove the turbine exhaust sleeve:
WARNING: MAKE SURE THE CRADLE HAS THE FULL WEIGHT OF THE SLEEVE ON
_______ IT BEFORE YOU REMOVE THE BOLTS. THE INCORRECT SUPPORT OF THE SLEEVE CAN CAUSE THE SLEEVE TO MOVE OR FALL. THIS CAN CAUSE INJURY TO PERSONS OR CAUSE DAMAGE TO THE COMPONENTS.
(a)
Remove the bolts (4), the washers (5), the brackets (7), and the nuts (6) that attach the sleeve (1) to the engine flange.
(b)
Move the sleeve (1) rearward away from the exhaust plug (2) before you lower it.
(c)
Lower the sleeve (1) to the ground.
TASK 78-11-01-404-009-N00
3. Turbine Exhaust Sleeve Installation (Fig. 401)
___________________________________
A. Special Tools and Equipment
(1) A78003-32 - Cradle, Engine Exhaust Sleeve (Recommended)
A78003-28 - Cradle, Engine Exhaust Sleeve (Alternative)
B. Consumable Materials
(1) D00006 Lubricant - Anti-Seize thread compound,
Never Seeze Pure Nickel Special (AMM 20-30-04/201)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
78-11-01
ALL ú ú N01 Page 404 ú Jun 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
C. Parts
~.............................................................................. | AMM | | AIPC | ................. ............................ | FIG | ITEM | NOMENCLATURE | SUBJECT | FIG | ITEM | ................................................................................ | 401 | 1 | Turbine Exhaust Sleeve | 78-11-01 | 01 | 5 | | | 4 | Bolt | | | 15 | | | 5 | Washer | | | 20 | | | 6 | Nut | | | 25 | | | 7 | Bracket | | | 105 | 2.....….........…...................................…..........…......…........1
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 EXHAUST 1(25)
