曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

 F.  In addition, the WBC provides discrete outputs for use by the cargo
 loading system.Load Sensors
____________
 A.  The load sensors for the main landing gear are mounted on the wheel truck lugs. They are enclosed in a protective cover which is bolted to the wheel truck.
 B.  The load sensors for the nose landing gear are installed inside the axle in the in-axle mount (IAM) assembly.
 C.  Each variable reluctance load sensor receives power from the WBC. On the main landing gear, the load sensors measure the deflection force on the wheel truck. On the nose landing gear, the load sensors measure the deflection force on the axle. The load sensors return individual wheel weight signals to the WBC.
Pitch Attitude Sensor
_____________________
 A.  The pitch attitude sensor (PAS) is aligned with the pitch axis of the airplane. The PAS receives power from the WBC. The PAS provides precise data on the pitch attitude of the airplane. The PAS is mounted on the forward bulkhead in the main equipment center.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-41-00
 ALL  ú ú 08A Page 1 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

CALIBRATION 
MODULE 
PITCH 
ATTITUDE  SEE  C 
SENSOR 
SEE  A 
WEIGHT AND BALANCE
COMPUTER 
SEE  B 
PITCH ATTITUDE SENSOR 
A 
LED DISPLAY 

TEST PUSHBUTTON
WEIGHT AND BALANCE COMPUTER CALIBRATION MODULE BC
Weight and Balance System - Component Location
Figure 1 (Sheet 1)

C80007
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-41-00
 ALL  ú ú 04A Page 2 ú Oct 10/93
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

SEE D
SEE E
FWD
SEE F NOSE GEAR (INSIDE AXLE) LOAD SENSOR 
D 
MOUNTING BRACKET  E  ARE MOUNTED INSIDE A PROTECTIVE COVER ON WHEEL TRUCK LUGS MAIN GEAR LOAD SENSORS 

LOAD SENSOR
F
Weight and Balance System Component Location
Figure 1 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-41-00
 ALL  ú ú 01A Page 3 ú Oct 10/88
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

REMOTE DEDICATED DISPLAY UNIT

Weight and Balance System - Component Location

Figure 1 (Sheet 3)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-41-00
 ALL  ú ú 09A Page 4 ú Feb 18/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
M48450
A
747-400
MAINTENANCE MANUAL

 4.  Calibration Module
__________________
 A.  The calibration module is used by the WBC as a data storage device. The CM stores information on airplane type, tail number, and landing gear calibration figures for later use by the computer. Information stored in the CM will not be lost when power is removed from the system.
 B.  Since all system calibration data is stored in the CM, the WBC can be replaced without recalibrating the system.
 C.  The CM is located in the main equipment center on shelf E2-4 next to the WBC. The CM receives power from the WBC.
 5.  Weight and Balance Computer
___________________________
 A.  The WBC uses input signals from the load sensors and pitch attitude sensor to compute airplane gross weight and center of gravity. It also uses individual and total tank fuel quantity inputs to calculate zero fuel weight and zero fuel center of gravity. The WBC is installed in the main equipment center on shelf E2-4.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 指示/記錄系統 1(80)