(2)  
32-00-30/201, Landing Gear Door Locks

 B. Access
 (1)  
Location Zones
 136 Wing Landing Gear Well, RH

 (2)  
Access Panel 731L Wing Landing Gear Door - Center Sec Inboard

 C. Procedure
 S 864-009
 (1)  Make sure these circuit breakers are open:
 (a)  P180 DC Power Distribution Panel
 1) 180J26 FLT RCDR DC

 S 424-010
 CAUTION:_______BE CAREFUL WITH THE ACCELEROMETER. IT CONTAINS EASILY DAMAGED COMPONENTS.
 (2)  
Carefully put the accelerometer on its bracket.

 (3)  
Install the three screws and one washer.

 (4)
Connect the DX393 electrical connector to the accelerometer.

 S 434-011
 S 434-012
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-31-03
 ALL  ú ú 01 Page 403 ú Oct 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 S 094-013
 WARNING:_______OBEY THE REMOVAL PROCEDURE FOR THE DOOR LOCKS. THE DOORS OPEN AND CLOSE QUICKLY. THE MOVEMENT OF THE DOORS CAN CAUSE INJURIES TO PERSONS AND DAMAGE TO EQUIPMENT.
 (5)  
Remove the door locks (AMM 32-00-30/201).

 S 864-016

 (6)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:

 (a)  P180 DC Power Distribution Panel
 1) 180J26 FLT RCDR DC

 D. Installation Test
 S 864-021
 (1)  
Supply electrical power (Ref 24-22-00/201).

 S 864-022

 (2)  
Get access to the CMC Input Monitoring function on a CDU:

 (a)  
Push the MENU key on the CDU.

 (b)  
Push the line select key adjacent to <CMCS.

 (c)  
Push the line select key adjacent to <OTHER FUNCTIONS.

 (d)  
Push the line select key adjacent to <INPUT MONITORING.

 S 714-023
 (3)  Do a test of the vertical acceleration signal:
 (a)  
Put C/020/340/00 into the scratchpad with the CDU keys.

 (b)  
Push the upper left line select key.

 (c)  
Push the line select key adjacent to HEX>.

 (d)  
Make sure that the display shows a value between X73E0007 and X7B10007 (where X can be all hexadecimal characters).

 NOTE: If you do not get a correct value, make sure that the
____ airplane is level. The airplane must be level with a tolerance of 0.25 degrees. Use a plumb-bob or an equivalent tool to make sure that the airplane is level.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 31-31-03
 ALL  ú ú 01 Page 404 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400 MAINTENANCE MANUAL
 DIGITAL FLIGHT DATA ACQUISITION CARD - REMOVAL/INSTALLATION
___________________________________________________________
 1.  General_______
 A.  There are two tasks in this procedure. The first task is the removal of the Digital Flight Data Acquisition Card (DFDAC). The second task is the installation of the DFDAC. The installation task includes a BITE check to make sure the DFDAC operates correctly.
 B.  The DFDAC (YMXA18) is installed in the MAWEA card file (M7952). The MAWEA is installed between the wheel well for the nose gear and the right side of the fuselage.
 TASK 31-31-06-004-012
 2.  Digital Flight Data Acquisition Card Removal (Fig. 401)____________________________________________
 A.  References
 (1)  
SSM 31-31-01

 (2)  
WDM 31-31-11, WDM 31-31-12

 B.  Access
 (1)  Location Zone 116 Area between Nose-Gear Wheel Well and Fuselage, RH
 C.  Procedure
 S 864-002
 (1)  Open these circuit breakers and attach DO-NOT-CLOSE tags:
 (a)  
P7, Overhead Circuit Breaker Panel
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 指示/記錄系統(tǒng) 1(58)