(d)  
Signs of air leakage at the inlet or outlet ports.

 1)  If there are signs of air leakage at the inlet or outlet ports, replace the metal gaskets (AMM 75-34-01/401).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 75-34-00
 ALL  ú ú C01 Page 601 ú Mar 15/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
SEEA
FWD
A 1
ON LATER PRODUCTION ENGINES, THE
BLEED VALVE DEFLECTOR WAS REMOVED

5th-Stage Start Bleed Valve Inspection Figure 601
ELBOW FITTING
AIR SIGNAL
TUBE FLANGE
START BLEED
VALVE HOUSING

DEFLECTOR BAFFLE FOR THE START BLEED VALVE
1
AIR SIGNAL TUBE FROM THE START BLEED VALVE
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 75-34-00
 ALL  ú ú C01 Page 602 ú Jul 15/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
S 216-004-C00
 (3) Examine the air signal tube for:
 (a)
Cracks, chafing or flat sections.

 1)  If there are cracks, chafing or flat sections in the tube, replace the tube.

 (b)
Damage or change to the shape of the tube or kinks.

 1)  If there is damage or change to the shape of the tube or kinks in the tube, replace the tube.

 (c)
Signs of air leakage at the elbow fitting:

 1)  If there are signs of air leakage at the elbow fitting, replace the O-ring (AMM 75-34-01/401).

 (d)
Loose tube nut or fittings.

 1)  Tighten the tube nut to 270-300 pound-inches (30.7-34.1 Newton meters), or tighten and replace the fittings if it is necessary.
 S 416-005-C00
 (4) Close the left thrust reverser half (AMM 78-31-00/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 75-34-00
 ALL  ú ú C02 Page 603 ú Jul 15/92
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / /
CFM56 ENGINES
737-300/400/500/ /MAINTENANCE MANUAL ////////////////////////
5TH-STAGE START BLEED VALVE - REMOVAL/INSTALLATION
__________________________________________________
 1.  General
_______
 A.  This procedure contains two tasks. The first task is to remove the 5th-stage Start Bleed Valve. The second task is to install the 5th-stage Start Bleed Valve.
 B.  The 5th-stage start bleed valve is found on the left side of the high pressure compressor (HPC) case at the 11 o'clock position between the core flanges N and P.
 TASK 75-34-01-004-001-C00
 2.  Remove the 5th-Stage Start Bleed Valve
______________________________________
 A.  References
 (1)  AMM 78-31-00/201, Thrust Reverser
 B.  Access
 (1)  
Location Zones
 506 Engine No. 1
 606 Engine No. 2

 (2)  
Access Panels 5739L/5738L Engine No. 1 - Thrust Reverser Half 5839R/5838R Engine No. 2 - Thrust Reverser Half

 C.  Procedure (Fig. 401)
 S 014-002-C00
 (1)  
Open the left thrust reverser half (AMM 78-31-00/201).

 S 034-003-C00

 (2)
Disconnect the air signal tube from the elbow on the bleed valve.

 S 034-004-C00

 (3)  
Loosen the jamnut and remove the elbow from the valve signal port.

 S 034-005-C00

 (4)  
Remove and discard the O-ring.

 S 034-006-C00

 (5)  
Loosen and remove the two V-band clamps at the inlet and outlet ports of the bleed valve.

 S 024-007-C00

 (6)  
Remove the bleed valve and discard the metal gaskets from air inlet and outlet ports.
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 空氣 AIR(130)