20-11-05
 ALL  ú
 ú  02  Page 867
 ú  Jun 18/00 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

SEAL AREA

MEASUREMENT
AREA

NOTE: I.D. AFTER SWAGE REQUIREMENTS-MEASURING METHOD FOR 35211 SLEEVE AND 35212 UNION.
TUBE O.D./DASH NO.  TUBE WALL  TORQUE  I.D. AFTER SWAGE 

TUBE MATERIAL: 3AI-2.5V TITANIUM PER AMS4945

0.250/-04  0.016  6-7  0.225-0.232 
0.375/-06  0.019  11-12  0.347-0.354 
0.500/-08  0.026  20-22  0.458-0.465 
0.625/-10  0.032  40-43  0.575-0.587 
0.750/-12  0.039  40-43  0.684-0.695 
1.000/-16  0.051  65-68  0.913-0.919 

SWAGING TORQUE AND I.D. AFTER SWAGE REQUIREMENTS
FOR 35211 SLEEVE AND 35212 UNIONS

Harrison Portable Swagers for BACS13BX Sleeves
Figure 813 (Sheet 5)

L09171
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú
 ú  02  Page 868
 ú  Jun 18/00 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L09223
TUBE SIZE
04
05
06
Swage Pressures for Elastomer Swaging Flareless SleevesFigure 814 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù.ú
 20-11-05
ALL  úú 02 Page 869 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.

08
*  SWAGE PRESSURES NECESSARY TO INSTALL BACS13BX FLARELESS SLEEVES ON TUBE MATERIALS WITH THE HARRISON PORTABLE AND STATIONARY SWAGERS
304 CRES (MIL-T-8504), 321 AND 347 CRES (MIL-T-8808)

304 1/8 HARD CRES (MIL-T-6845)
MINIMUM SWAGE PRESSURE - IF YOU MUST SWAGE AGAIN, INCREASE IN 5% INCREMENTS.

A747-400MAINTENANCE MANUAL
A
747-400
MAINTENANCE MANUAL

Swage Pressures for Elastomer Swaging Flareless Sleeves
Figure 814 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 02 Page 870 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L09305
A
747-400
MAINTENANCE MANUAL

TUBE
OD

04  05  06  08  10  12  16  20  24 
|0.010 P  0.214  0.230  0.230  0.285  0.330  0.330  0.392  0.395 0.355 2 1  0.465 0.350 2 1 
max A  0.374  0.437  0.493  0.673  0.789  0.964  1.214  1.474  1.723 
max G  0.298  0.364  0.423  0.550  0.686  0.822  1.070  1.323  1.573 
max H  0.260  0.322  0.385  0.511  0.636  0.761  1.011  1.262  1.517 

DIMENSION
____ALL DIMENSIONS ARE IN INCHES.
NOTE:
DIMENSIONS OF FLARELESS TUBE ENDS AND BACS13BX SLEEVES AFTER ELASTOMERIC SWAGING

ALL EXCEPT SHORT FLARELESS SHORT FLARELESS
BACS13BX Flareless Sleeve Dimensions After Elastomeric Swaging
Figure 815

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 02 Page 871 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L09391
A
747-400
MAINTENANCE MANUAL

AFTER ZERO
TUBE
BACS13BX (TWO GROOVES)
04 SIZE TUBE  0.020 MINIMUM DEPTH 2A  0.032 MAXIMUM - INCHES 
05  0.020  0.032 
06  0.020  0.032 
08  0.020  0.032 
10  0.022  0.034 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 STANDARD PRACTICES - AIRFRAME(45)