20-11-05
 ALL  ú ú 02 Page 853 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L08478
A
747-400
MAINTENANCE MANUAL

UNION PART NO.  PART NO. SLEEVE  04  05  06  08  10 TUBE SIZE  12  16  20  24 
MS21902  BACS13AP  0.59  0.56  0.68  0.76  0.86  1.05  N/A  N/A  N/A 
Assembly CRYOLIVE Swager) (Harrison Elastomer BACS13BX  0.63  0.60  0.72  0.80  0.90  1.09  0.96  0.96  0.96 
6777) Swager 35211 (Harrison Roller Swager) (Harrison Roller BACS13BX  0.82  N/A  0.95  1.03  1.21  1.40  1.40  N/A  N/A 
MS21924  BACS13AP  1.18  1.18  1.29  1.42  1.55  1.78  N/A  N/A  N/A 
(Harrison Elastomer BACS13BX Swager) Assembly CRYOLIVE  1.22  1.22  1.33  1.46  1.59  1.82  1.68  1.67  1.67 
6777) Swager 35211 (Harrison Roller Swager) BACS13BX (Harrison Roller  1.41  N/A  1.56  1.69  1.90  2.13  2.13  N/A  N/A 
Rynglok  0.300  N/A  0.300  0.350  0.350  0.350  0.400  0.400  N/A 
Cryofit Permaswage H-Coupling  Necessary None  0.150 INCH MAXIMUM 

TUBE CUTOUT LENGTHS IN INCHES

Tubing Repair with Unions - Short Damage
Figure 805 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú
 ú  02  Page 854
 ú  Jun 18/00 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L08505
A
747-400
MAINTENANCE MANUAL

MS FLARELESS

NOTE: REFER TO FIG. 810 (SHEET 1) FOR THE LENGTHS L1 AND L2.
Tubing Repair by End Replacement
Figure 806

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 02 Page 855 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L08572
A

747-400
MAINTENANCE MANUAL

BACU24AB UNION WITH MS21924 BULKHEAD UNION AND A ROLLER SWAGED BACS13BX SLEEVE
A

NOTE: REFER TO FIG. 808 FOR THE LENGTHS A,B AND C. COUPLING NUTS NOT SHOWN.
Tube Cutout Lengths for
Replacement of Damaged BACU24AB Swage Unions
Figure 807 (Sheet 1)

L08601
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 02 Page 856 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

MS21924 OR EQUIVALENT BULKHEAD UNION

BACU24AB UNION WITH MS21924 BULKHEAD UNION AND A PRESET BACS13AP SLEEVE

Tube Cutout Lengths for
Replacement of Damaged BACU24AB Swage Unions
Figure 807 (Sheet 2)

L08651
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 02 Page 857 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

747-400
MAINTENANCE MANUAL

Repair Method:  You need to replace a damqged BACu24AB swage union. You will cut out the fitting and replace it with a BACS13BX or BACS13AP sleeve, a coupling nut and MS21924 flareless bulkhead union of the same or equivalent material as the union you are replacing. Check Fig. 802 for sleeve/tube material limitations.
To make the repair (Refer to Fig. 807):
Step 1:  Cut the tube adjacent to the damaged union - to dimension A, B, or C depending on the sleeve and sleeve installation method you plane to use.
Step 2:  Slide a flareless coupling nut on the tube. Follow the procedures for presetting a BACS13AP sleeve or swaging a BSCS13BX sleeve to the tube end.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 STANDARD PRACTICES - AIRFRAME(42)