D.  HOSE END FITTINGS WITH STEEL INSERTS (NIPPLES)
E.  ALL TITANIUM TUBE ENDS
TORQUE VALUES APPLICABLE TO THE FOLLOWING TUBE ENDS:
A.  ALUMINUM WITH BACS13BD & BACS13BX SWAGED SLEEVES
B.  6061-T6 ALUMINUM WITH PRESET BACS13AP SLEEVES
C.  ANNEALED CRES WITH PRESET BACS13AP SLEEVES

D.  FLARELESS TYPE HOSE END FITTINGS WITH ALUMINUM INSERTS (NIPPLES)
E.  ALUMINUM FLARED TUBE ENDS
Installation Torque for Flareless Fittings
Figure 403 (Sheet 1)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú
 ú  01  Page 415
 ú  Feb 15/98 

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.

A
747-400
MAINTENANCE MANUAL

CARE SHOULD BE TAKEN IN SELECTING THE CORRECT TORQUE FOR REDUCER FITTINGS. THE BOSS OR BULKHEADSIZE DETERMINES THE FITTING INSTALLATION TORQUE.
TUBE MATERIAL SPECIFICATIONS:
A. 6061-T6 ALUMINUM - MIL-T-7081, WW-T-700/6
B. ANNEALED CRES - MIL-T-8504, MIL-T-8606, MIL-T-8808
C. 1/8 HARD CRES - MIL-T-6845 D 21-6-9 CRES - BMS 7-185
E. TI-3AL-2.5V - BMS 7-234
TORQUE VALUES ARE APPLICABLE TO STANDARD MS FLARELESS TUBE ENDS (BACS13AP SLEEVES) ON MIL-T-6845 (304-1/8 HARD) TUBING WITH A MINIMUM WALL THICKNESS AS GIVEN BELOW:

SIZE  -4  -5  -6  -8  -10  -12 
THICKNESS WALL  0.020  0.020  0.028  0.035  0.049  0.049 

TORQUE EXCEPTION FOR SPECIAL THIN WALL MIL-T-6845 (304-1/8h) TUBING IS AS FOLLOWS:
SIZE  -8  -10  -12 
THICKNESS WALL  0.028  0.035  0.042 
(POUND-INCHES) TORQUE  375  575  725 

TORQUE VALUES ARE APPLICABLE TO STANDARD MS FLARELESS TUBE ENDS (BACS13AP SLEEVES) ON 6061-T6 ALUMINUM AND ANNEALED CRES TUBING WITH A MINIMUM WALL THICKNESS AS GIVEN BELOW:
SIZE  -3  -4  -5  -6  -8  -10  -12  -16 
THICKNESS WALL  0.028  0.028  0.028  0.028  0.028  0.028  0.028  0.035 

TORQUE EXCEPTION FOR SPECIAL THIN WALL ANNEALED CRES TUBING IS AS FOLLOWS:
SIZE  -6  -10  -12 
THICKNESS WALL  0.020  0.020  0.020 
(POUND-INCHES) TORQUE  160  250  325 

Installation Torque for Flareless Fittings
Figure 403 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 01 Page 416 ú Feb 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL

RESISTANCE BETWEEN BULKHEAD FITTINGS AND HYDRAULIC TUBE

TUBE SIZE  MAXIMUM RESISTANCE (MILLIOHM) 
ALUMINUM  TITANIUM 
PERMASWAGE  WELD-ON 
-04  ____  6  12 
-06  0.70  4  8 
-08  ____  2.5  5 
-10  0.41  1.5  3 

Resistance Between Bulkhead Fittings and Hydraulic Tubing
Figure 404

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 20-11-05
 ALL  ú ú 01 Page 417 ú Feb 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
E47335
A
747-400
MAINTENANCE MANUAL

RESISTANCE ACROSS UNION/TEE FITTINGS (TUBE-TO-TUBE)

TUBE SIZE  MAXIMUM RESISTANCE (MILLIOHM) 
ALUMINUM  TITANIUM 
-04  ____  12 
-06  1.30  8 
-08  ____  5 
-10  0.75  3 

Resistance Across Union/Tee Fittings (Tube-To-Tube)
Figure 405

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 STANDARD PRACTICES - AIRFRAME(16)