ASSOCIATED APPROVED FITTINGS FOR OTHER UNIONS, REDUCERS, ELBOWS, AND TEES WITH MS33514 OR MS33515 FITTING ENDS; AND FOR SHORT FLARELESS FITTING APPLICATIONS, OTHER UNIONS, REDUCERS, ELBOWS AND TEES WITH AS4658 OR AS4659 FITTING ENDS.
USE ONLY THE CRYOLIVE FLARELESS SLEEVE ASSEMBLY, CONSISTING OF THE CRYOLIVE SLEEVE, COUPLING NUT AND PLASTIC CAP. THE CRYOLIVE FLARELESS SLEEVE ASSEMBLY, IN SIZES 10, 12 AND 16, REQUIRES USE OF A LONGER LENGTH AMCI P/N 9211699 (MATERIAL CODE)(SIZE) N COUPLING NUT. THE LONGER LENGTH COUPLING NUTS ARE NOT INTERCHANGEABLE WITH STANDARD BACN10- AND MS21921 COUPLING NUTS.
WHEN PERFORMING A HYDRAULIC TUBE REPAIR WITH THE SAME TUBE MATERIAL, THE ALTERNATE TUBE WALL THICKNESSES LISTED IN FIG. 802 (SHEET 6) MAY BE USED IN PLACE OF WALL THICKNESSES DELIVERED WITH THE AIRPLANE WHEN PERFORMING A REPAIR ON TUBES IN SYSTEMS WITH 3000 PSI OR LESS OPERATING PRESSURE.
Tube Material and Fitting Selection Tables
Figure 802 (Sheet 8)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-11-05
ALL ú ú 02 Page 849 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L08183
A
747-400
MAINTENANCE MANUAL
ALL DIMENSIONS ARE IN INCHES.
NOTE: THE ABOVE LIMITS WERE VERIFIED BY HYDRAULIC IMPULSE FATIGUE AND BURST TESTING (FOR ADDITIONAL INFORMATION SEE SAE-AIR 1388).
Permitted Tube Problem Depth -Hydraulic Pressure (3000 PSI), Return Lines (1500 PSI), and Fire Extinguishing Pressure (1000 PSI) Figure 803
L08197
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-11-05
ALL ú ú 02 Page 850 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
CUTTER TOOL
TUBE SIZE 04 D9872 PART NUMBER CHIPLESS CUTTER D9872-114 PART NUMBER CUTTER WHEEL
06 D9872 D9872-114
08 D9853 D9853-214
10 D9853 D9853-214
12 D9853 D9853-214
DEUTSCH CHIPLESS CUTTERS AND CUTTER WHEELS
TABLE A
Deutsch Tools
Figure 804 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-11-05
ALL ú ú 02 Page 851 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
L08394
A
747-400
MAINTENANCE MANUAL
DEBURRING TOOL ASSEMBLY
_ _TT
THROUGH
DEBURRING TOOL INSERTION
PLUG EXPANDED CHAMFER DIMENSIONS DEBURRING TOOL EXTRACTION
04 TUBE SIZE 0.016-0.028 THICKESS (INCHES) TUBE WALL D9851-13-04 PART NUMBER STEM SUBASSEMBLY D9851 PART NUMBER DEBURRING TOOL
04 0.028-0.050 D9851-13-03 D9851
06 0.016-0.035 D9851-13-06 D9851
06 0.035-0.058 D9851-13-07 D9851
08 0.016-0.042 D9850-13-08 D9850
10 0.016-0.058 D9850-13-10 D9850
12 0.016-0.058 D9850-13-12 D9850
16 0.016-0.058 D9849-13-16 D9849
20 0.016-0.058 D9849-13-20 D9849
DEUTSCH STEM SUBASSEMBLIES, DEBURRING TOOLS, AND
REQUIRED CHAMFER DIMENSIONS
TABLE B
Deutsch Tools
FIgure 804 (Sheet 2)
L08431
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
20-11-05
ALL ú ú 02 Page 852 ú Jun 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
747-400
MAINTENANCE MANUAL
DEFECT (PINHOLE OR SHORT CRACK)
NOTE: FITTING NUTS NOT SHOWN.
Tubing Repair with Unions - Short Damage
Figure 805 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：747-400 AMM 飛機維護手冊 STANDARD PRACTICES - AIRFRAME(41)
