(n)  
VHF Navigation systems (AMM 23-21-00/501)

 (o)  
Fuel quantity system (AMM 28-41-00/501)

 (p)  
Captain's clock (Ref 31-25-00/501)

 (q)  
First officer's clock (AMM 31-25-00/501)

 (r)  
Captain's HSI (AMM 34-28-00/501)

 (s)  
First officer's HSI (AMM 34-28-00/501)

 (t)  
Captain's Flight Mode Annunciator (FMA) (AMM 22-11-00/501)

 (u)  
First officer's FMA (AMM 22-11-00/501)

 S 865-011
 (9)  
Make sure the LANDING GEAR AIR/GND RELAY & LIGHTS circuit breaker on the panel P6 is in the GND position.

 S 865-010

 (10)
 Make sure these circuit breakers are closed:

 (a)  P18 Panel
 1) CDU No. 1
 2) CDU No. 2
 3) FMC (or FMCS CMPTR)
 4) MODE ANN

 E. Annunciator Test
 S 715-207
 (1)  
Do the preparation test in this task: "Operational Test - FMCS" if it is necessary.

 S 865-212

 (2)  
Open these circuit breakers and attach DO-NOT-CLOSE tags:

 (a)  P18 Panel
 1) FMC (or FMCS CMPTR)
 2) CDU No. 1
 3) CDU No. 2
 4) MODE ANN

 S 865-213
 (3)  Close the circuit breakers that you opened, but do not close the FMC (or FMCS CMPTR) circuit breaker.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITHOUT EFIS ú

 34-62-00

 ú ú 12 Page 506 ú Mar 12/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
 S 715-214
 (4)  Do the Annunciator Test:
 (a)  
Make sure the FAIL light on each CDU comes on.

 (b)  
Make sure the FMC P/RST light on the Captain's Instrument Panel (P2) is on.

 (c)  
Make sure the FMC P/RST light on the First Officer's Instrument Panel (P3) is on.

 (d)  
Put the Master Dim and Test switch on the Pilot's Center Instrument Panel (P2) in the TEST position.

 (e)  
Make sure the DSPY, FAIL, MSG, OFST and EXEC lights on the CDU front panel come on.

 (f)  
Make sure the FMC P/RST light on the Captain's FMA stays on.

 (g)  
Make sure the FMC P/RST light on the First Officer's FMA stays on.

 (h)  
Put the MASTER DIM and TEST switch in the DIM position. 1) Make sure the FAIL light on each CDU is on dimly. 2) Make sure the DSPY, MSG, OFST and EXEC lights go off.

 (i)  
Put the MASTER DIM and TEST switch in the BRT position. 1) Make sure the FAIL light on each CDU comes on brightly. 2) Make sure the FMC P/RST light on the Captain's FMA comes on

 brightly. 3) Make sure the FMC P/RST light on the First Officer's FMA comes on brightly.

 (j)  
Push the FMC P/RST switch on the Captain's FMA and make sure the FMC P/RST light goes off.

 (k)  
Push the FMC P/RST switch on the First Officer's FMA and make sure the FMC P/RST light goes off.

 S 865-216
 (5) Close the FMC (or FMCS CMPTR) circuit breaker on the P18 panel.
 F.  Navigation Data Base, Operational Program, Engine Type and Clock verification
 S 715-208
 (1)  
Do the preparation test in this task: "Operational Test - FMCS" if it is necessary.

 S 285-215

 (2)  
Do these steps to examine the Navigation Data Base, Operational Program, Engine Type and Clock:

 (a)  Open the FMC (or FMCS CMPTR) circuit breaker on the P18 panel.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITHOUT EFIS ú

 34-62-00
 ú ú 03 Page 507 ú Nov 15/91

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
 (b) (c) (d)  After 15 seconds, close the FMC (or FMCS CMPTR) circuit breaker.Make sure the CDU display shows the IDENT 1/1 page.Make sure the part numbers of the navigation data base and the operational program are correct.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 導航 NAVIGATION 5(15)