Control Display Unit - Annunciator Lamp Replacement
Figure 301
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-62-11
ALL ú ú 01 Page 302 ú Feb 25/85
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(c) Remove the defective lamp assembly from the switch circuit board.
S 423-004
(3) Install the lamp assembly:
(a)
Install the new lamp assembly on the switch circuit board.
(b)
Install the legend plate on the CDU with the two screws and lockwashers.
S 863-014
(4) Remove the DO-NOT-CLOSE tag and close this circuit breaker:
(a) P18-2 Panel
1) FMCS CDU No. 1
NOTE: On airplanes with provisions for dual FMC, FMCS CDU
____ (ANCDU, MCDU) No. 2 circuit breaker will be on the P6-1 panel.
TASK 34-62-11-963-006
3. EXEC Annunciator Replacement (Fig. 301)
____________________________
A. Consumable Material
(1) B00090 - Solvent, MIL-T-81533
B. Standard Tools and Equipment
(1)
Brush - Soft Bristle
(2)
Vacuum Source
C. References
(1) 20-30-31/201, Cleaners and Polishes
D. Access
(1) Location Zones
101 Control Cabin, Left
102 Control Cabin, Right
E. EXEC Annunciator Replacement
S 863-015
(1) Open this circuit breaker and attach DO-NOT-CLOSE tag:
(a) P18-2 Panel
1) FMCS CDU No. 1
NOTE: On airplanes with provisions for dual FMC, FMCS CDU
____ (ANCDU, MCDU) No. 2 circuit breaker will be on the P6-1 panel.
S 023-008
(2) Remove the lamp:
(a)
Remove the two screws that hold the lamp holder to the lighted switch.
(b)
Remove the lamp assembly from the lamp holder.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
34-62-11
ALL ú ú 08 Page 303 ú Jul 15/95
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
S 103-021
(3) If the EXEC key lamp operation is intermittent, do these steps:
(a) Remove all dust or loose dirt from the EXEC push-button housing and the EXEC lamp assembly with a soft-bristle brush.
WARNING: YOU MUST WEAR A FACE MASK OR GOGGLES, PLASTIC (PVA) GLOVES
_______ AND BE IN A WELL VENTILATED AREA WHEN YOU USE TRICHLOROETHANE. TRICHLORETHANE IS CAUSTIC AND TOXIC. IF YOU DO NOT FOLLOW THESE PRECAUTIONS, INJURY TO PERSONNEL CAN RESULT.
(b)
Clean the electrical contacts on the EXEC lamp assembly with a soft-bristle brush and solvent.
(c)
Dry the EXEC lamp assembly with a vacuum source.
S 423-009
(4) Install the lamp:
(a)
Install the new lamp assembly.
(b)
Install the lamp holder with the two screws that keep the lamp holder on the lighted switch panel.
S 863-016
(5) Remove the DO-NOT-CLOSE tag and close this circuit breaker:
(a) P18-2 Panel
1) FMCS CDU No. 1
NOTE: On airplanes with provisions for dual FMC, FMCS CDU
____ (ANCDU, MCDU) No. 2 circuit breaker will be on the P6-1 panel.
TASK 34-62-11-713-011
4. CDU Annunciator Lamp Test
_________________________
A. Reference
(1) 24-22-00/201, Manual Control
B. Access
(1) Location Zones
101 Control Cabin, Left
102 Control Cabin, Right
C. Procedure
S 863-020
(1)
Supply electrical power (Ref 24-22-00/210).
S 713-012
(2)
Do the CDU Annunciator Lamp Test:
(a) Make sure the DIM & TEST circuit breaker on the P6-3 circuit breaker panel is closed.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 導航 NAVIGATION 5(113)
