(2)
You operate the rod-operated sump drain assembly with a rod attached to the valve. The rod-operated assembly has a thread by which you attach it to the boss of the sump drain valve.
D. It is not necessary to drain the center tank or to remove the sump drain valve to remove the sump drain assembly. The valve assembly is in the keel beam area between the two access doors for the air conditioning bay.
TASK 28-11-41-004-002
2. Sump Drain Assembly (Tool-Operated) (Fig. 401)___________________________________
A. References
(1) Chapter 21, Air Conditioning
B. Access
(1)
Location Zone
215 Keel Beam
(2)
Access Panels
3303 A/C Access Panel
3403 A/C Access Panel
C. Procedure
S 014-003
(1) Open the access door for the air conditioning bay to get access to the drain assembly (Ref Chapter 21).
(a) Get access to the valve through the lightening holes in the keel beam.
S 024-004
(2) Remove the parts that attach the drain assembly to the structure.
(a)
Disconnect the bonding jumper from the airplane structure.
(b)
Open the access door for the sump drain on the bottom of the keel beam.
(c)
Remove the bolts and the washers that hold the retaining plate to the lower housing.
(d)
Remove the bolts and the washers that hold the retaining plate to the drain outlet structure.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-41
ALL ú ú 02 Page 401 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
CENTER WING CAVITY NO. 2 SEE A
SUMP DRAIN ASSEMBLY SEE B
BAY NO. 2 SPANWISE BEAM
ACCESS PANEL
LOWER BODY SKIN TANK SUMP DRAIN ASSEMBLY SEE B
A
Center Tank Sump Drain Assembly and Drain Valve Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-41
ALL ú ú 02 Page 402 ú Jul 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
SUMP ATTACHING
SUMP DRAIN FLAPPER DRAIN BOLTS
VALVE ASSEMBLY VALVE
LOWER WING
SKIN PANEL
O-RING PLUNGER
UPPER
O-RING HOUSING
UPPER HOUSING LOCKPIN
LOCKING VALVE
DETENT ACTUATING
EARS CAM
PLUNGER DRAIN TUBE ASSEMBLY HOSE SUMP DRAIN SUMP
ASSEMBLY DRAIN ASSEMBLY
CLAMP
BONDING JUMPER ACTUATING
(TO STRUCTURE) ROD
HOSE RETAINING PLATE
LOWER HOUSING
RETAINING PLATE
DRAIN
DRAIN WELL LOWER
DOOR ACCESS TUBE ACCESSLOWER BODY BODY SKINFASTENER DOOR
SKIN DOOR
(ROD ACTUATED SUMP DRAIN ASSEMBLY) (TOOL ACTUATED SUMP DRAIN ASSEMBLY)
SUMP DRAIN ASSEMBLY
B
Center Tank Sump Drain Assembly and Drain Valve Installation Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
28-11-41
ALL ú ú 02 Page 403 ú Jul 15/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(e) Remove the retaining plate.
S 024-005
(3) Remove the drain assembly.
(a)
Turn the drain assembly clockwise until it moves freely from the upper housing.
(b)
Lower the drain assembly down in a straight line to remove it.
(c)
Discard the O-rings.
TASK 28-11-41-404-007
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 燃油 FUEL 1(125)
