(2)
Access Panels
4404R, Forward Cargo Compartment Door
4405R, Aft Cargo Compartment Door
C. Prepare for the Installation
S 864-011
(1) Make sure that these circuit breakers are open:
(a) Circuit Breaker Panel, P6 or P18 1) FWD CARGO SMOKE DETECTION A 2) FWD CARGO SMOKE DETECTION B 3) AFT CARGO SMOKE DETECTION A 4) AFT CARGO SMOKE DETECTION B
S 014-012
(2) Open the applicable (forward or aft) cargo compartment door.
D. Install the CEU
S 434-013
(1)
Connect the electrical connectors to the CEU (1).
S 424-014
(2)
Put the CEU (1) in its position in the ceiling bracket.
S 434-015
(3)
Install the screws (2) to hold the CEU in its position.
E. Do the Installation Test
S 864-016
(1)
Supply Electrical Power (AMM 24-22-00/201).
S 864-017
(2)
Remove the DO-NOT-CLOSE tags and close these circuit breakers:
(a) Circuit Breaker Panel, P6 or P18 1) FWD CARGO SMOKE DETECTION A 2) FWD CARGO SMOKE DETECTION B
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH LOWER CARGO ú
26-16-02
FIRE PROTECTION SYSTEM ú ú 01 Page 404 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
3) AFT CARGO SMOKE DETECTION A
4) AFT CARGO SMOKE DETECTION B
S 714-018
(3) Do a test of the CEU
(a)
Push and hold the LAMP TEST switch on the CEU.
1) Make sure all the smoke detector indicators (loop A and B), on the CEU, come on.
(b)
Release the LAMP TEST switch.
(c)
Push and hold the PRESS TO TEST switch on the CEU.
1) Make sure all the smoke detector indicators (loop A and B), on the CEU, come on.
(d)
Release the PRESS TO TEST switch.
S 434-019
(4)
Put the cover (3) over the CEU (1).
S 434-020
(5)
Install the screws (4) to hold the cover in its position.
F. Put the Airplane Back to its Usual Condition
S 414-021
(1)
Close the applicable (forward or aft) cargo compartment door.
S 864-022
(2)
If it is not necessary, remove the Electrical Power
(AMM 24-22-00/201).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH LOWER CARGO ú
26-16-02
FIRE PROTECTION SYSTEM ú ú 01 Page 405 ú Jul 12/01
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
1.
2.
3.
A
737-300/400/500MAINTENANCE MANUAL
WHEEL WELL OVERHEAT DETECTION SYSTEM -
______________________________________ DESCRIPTION AND OPERATION
_________________________
General
_______
A. The wheel well overheat detection system provides overheat detection in the main wheel well area. The detection system is an electrical, heat sensing system that responds to overheat by activating fire warning lights and an alarm bell.
B. The wheel well overheat detection system consists of the engine and APU fire control module P8-1, compartment overheat accessory unit M237, alarm bell, master fire warning lights, and a sensing element. The sensing element is connected to the compartment overheat accessory unit, which monitors the resistance of the sensing element. When a temperature rise causes the element resistance to drop to the value corresponding to the alarm temperature, the compartment overheat accessory unit will provide a signal to the wheel well warning light and alarm bell and a ground to the master fire warning lights.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機(jī)維護(hù)手冊 防火 FIRE PROTECTION(54)
