(b)
Make sure all these lights on the P7 panel come on. 1) AIRPLANES WITH OTHER THAN -98 FIRE DETECTION UNIT;
the two FIRE WARN lights.
2) The MASTER CAUTION lights.
3) The OVHT/DET annunciator.
(c)
AIRPLANES WITH OTHER THAN -98 FIRE DETECTION UNIT;
the alarm bell in the control cabin operates.
S 865-159
CAUTION: DO NOT TURN THE FIRE SWITCH WHILE IT IS IN THE OUT POSITION.
_______ THE CONTENTS OF THE FIRE BOTTLE WILL BE LET OUT.
(7) Pull the engine 2 fire switch up.
NOTE: The switch must be free to move up without the use of the
____
override button.
S 865-161
(8)
Push in the engine 2 fire switch to close.
S 865-162
(9)
Turn the knobs for loop A and loop B on the test box back to the NORMAL position.
(a) Make sure these lights on the P8-1 panel go off.
1) The lights in the engine 2 fire swtich.
2) The ENG 2 OVERHEAT light.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
26-11-00
ALL ú ú 03A Page 513 ú Jul 15/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
(b)
Make sure all these lights on the P7 panel go off. 1) AIRPLANES WITH OTHER THAN -98 FIRE DETECTION UNIT;
the two FIRE WARN lights.
2) The MASTER CAUTION lights.
3) The OVHT/DET annunciator.
(c)
AIRPLANES WITH OTHER THAN -98 FIRE DETECTION UNIT;
the alarm bell in the control cabin makes no sound
S 865-166
(10) Close this circuit breaker on the P6 panel:
(a) FIRE PROTECTION DETECTION - ENG 1
S 865-167
(11)
The FAULT light on the P8-1 panel goes off.
S 865-160
(12)
Move the switch for loop A on the test box to the GND FAULT position.
(a) Make sure the ENGINE 2 INOP-LOOP A light on the M279 module at the E3-3 shelf comes on.
S 865-163
(13) Move the switch for loop B on the test box to the GND FAULT position.
(a) Make sure these indications occur: 1) The ENGINE 2 INOP-LOOP B light on the M279 module comes on. 2) The FAULT light on the P8-1 panel comes on.
S 865-075
(14) Move the switches for loop A and loop B on the test box back to the NORMAL position.
(a) Make sure these indications occur: 1) The ENGINE 2 INOP-LOOP A light on the M279 module is off. 2) The ENGINE 2 INOP-LOOP B light on the M279 module is off. 3) The FAULT light on the P8-1 panel is off.
S 865-164
(15)
Open these circuit breakers on the P6 panel:
(a)
FIRE PROTECTION DETECTION _ ENG 1
(b)
FIRE PROTECTION DETECTION - ENG 2
(c)
MASTER WARNING AND CONTROL
(16)
Disconnect the test box from the airplane.
S 425-078
(17)
AIRPLANES WITH ELECTRICAL CONNECTORS; Connect these electrical connectors:
(a)
D2898 (Upper fan detector - loop A)
(b)
D2902 (Upper fan detector - loop B)
S 085-077
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
26-11-00
ALL ú ú 02A Page 514 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
H. Measure the electrical continuity from the fire detection elements to the airplane ground on engine 2.
S 485-079
(1) Connect the multimeter between the outer shell of the upper fan detector element and the airplane ground.
(a) Make sure the resistance is less than 1 ohm.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 防火 FIRE PROTECTION(21)
