A
NUT
A
SENSING ELEMENTS SUPPORT TUBE MOUNTED ON SUPPORT TUBE
CLAMP
PIN RECEPTACLE
PIN
RECEPTACLE
END BRACKET
SOCKET
RECEPTACLE
NUT
A-A
SOCKET
DETECTOR ASSEMBLY (EXAMPLE)
RECEPTACLE
(AIRPLANES WITH PIN-SOCKET CONNECTORS)
Engine Fire Detector Installation
Figure 401 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
26-11-11
ALL ú ú 02 Page 402 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
B
LOWER FAN DETECTOR CORE DETECTOR
Engine Fire Detector Installation
Figure 401 (Sheet 2)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
26-11-11
ALL ú ú 03 Page 403 ú Jul 15/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
737-300/400/500MAINTENANCE MANUAL
TASK 26-11-11-404-012
3. Install the Detector____________________
A. Equipment
(1) Bonding meter (AMM 20-22-01/601)
B. Consumable Materials
(1)
Sealant - Silicone, Dow Corning DC-4 (AMM 20-30-11/201)
(2)
Solvent - Cleaning, Methyl Alcohol (AMM 20-30-31/201)
(3)
Solvent - Cleaning, Acetone (AMM 20-30-31/201)
C. Procedure
S 094-013
(1)
Remove the caps and jamnuts from the detector end fittings.
S 434-014
(2)
Install the end fittings on the mounting bracket.
NOTE:____Hold the detector when you install the detector. Do not bend the detector.
S 434-033
CAUTION: MAKE SURE THERE IS A MINIMUM CLEARANCE OF .12 INCH BETWEEN THE
_______ DETECTOR SENSOR AND THE SUPPORT TUBE. INCORRECT INSTALLATION WILL RESULT IN A FAILED DETECTOR.
(3) Install the detector in the clamps and attach the clamps.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
26-11-11
ALL ú ú 02 Page 404 ú Jul 12/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A 737-300/400/500MAINTENANCE MANUAL
S 164-019
WARNING:_______ OBEY THE PRECAUTIONS AND WARNINGS SHOWN ON THE SOLVENT
CONTAINER. DO NOT GET SOLVENT IN YOUR MOUTH OR EYES, OR ON
YOUR SKIN. SUPPLY SUFFICIENT AIR. DO NOT BREATHE THE FUMES
FROM THE SOLVENT. PUT ON A PROTECTIVE SPLASH GOGGLE AND GLOVES
WHEN YOU USE THE SOLVENT. KEEP THE SOLVENT AWAY FROM SPARKS,
FLAME, OR HEAT. LET THE ENGINE COOL BEFORE USING SOLVENT. THE
SOLVENT IS POISONOUS AND FLAMMABLE WHICH CAN CAUSE INJURY OR
DAMAGE.
CAUTION:_______ CLEAN THE CONNECTORS USING METHYL ALCOHOL OR ACETONE ONLY. DO
NOT USE OTHER CLEANING SOLVENTS FOR THIS PURPOSE. COMMERCIALLY
AVAILABLE CONTACT CLEANERS MAY CONTAIN CHLORIDES WHICH PROMOTE
CORROSION IN SEALED AREAS, AND CAN CAUSE DAMAGE.
(4) AIRPLANES WITH PIN-SOCKET CONNECTORS; Remove the caps from the connectors and make sure the detector and the airplane electrical connectors are clean and free of contamination.
(a)
If you find contamination, clean the connection (Standard Wiring Practices Manual 20-30-31/201).
(b)
Shake the unwanted liquid out of the connector and dry with one of the two dry compressed air or nitrogen at a pressure of 20-25 psig.
NOTE: All remaining moisture can cause a low resistance to
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 防火 FIRE PROTECTION(26)
