H. Self-Test Switches and Warning Lights Test
S 735-008
(1) Do the warning lights and the self-test switches test:
(a)
Set the BITE switch on the Yaw Damper coupler to the "ARM" position.
(b)
Make sure the AUTOPILOT DISENGAGED lights are on continuously.
(c)
Make sure the lights do not extinguish when the autopilot system is engaged or disengaged.
(d)
To turn off the AUTOPILOT DISENGAGED lights, set the BITE switch on the Yaw Damper coupler to the OFF position.
I. Yaw Damper Self-Test
S 865-010
(1) Do these steps to prepare for the yaw damper self-test:
(a) Make sure that all systems related to the Yaw Damper system are on.
NOTE: Make sure the line voltage is 115 | 5.8 volts ac and 28
____
| 1.4 volts
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH 10-60447 YAW DAMPER ú
22-12-00
COUPLER ú
ú 02 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 503Jul 15/98
A 737-300/400/500MAINTENANCE MANUAL
(b) (c) Make sure the Autopilot Warning Lights come on when you turn the BITE switch to "ARM".Make sure the airspeed is at zero knots.
NOTE:____ During self-test the EADI will indicate 45 knots when the airspeed is at zero knots.
(d) Make sure that you engage the Yaw Damper system during the self-test.
NOTE:____ It is not necessary to do the tests in sequence. First, turn the BITE switch to off and to ARM. Push the GO switch to one test before the necessary test. Do that test and ignore the test result. Then push the GO switch to the test you want to do.
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. AIRPLANES WITH 10-60447 YAW DAMPER ú
22-12-00
COUPLER ú
ú 03 ú BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details. Page 504Nov 12/00
A
737-300/400/500MAINTENANCE MANUAL
S 745-011
(2) Yaw Damper Self Test ~...................................................................... | STEP | OBSERVE | | ........................... | | TEST | LIGHTS | LIGHTS | | | NO. | PASS | FAIL | ........................................................................
| (a) BITE Self Test Arm | | | |
| 1) Make sure you disengage the | | | |
| yaw damper. | | | |
| 2) Set the BITE switch to ARM. | | ON | OFF |
| 3) Make sure the Autopilot | | | |
| Disengage Warning Lights come | | | |
| on. | | | |
| 4) Push the LAMP TEST switch and | 8 | ON | ON |
| hold. | | | |
| 5) Release the LAMP TEST switch. | 0 | ON | OFF |
| (b) Test 1 - Rate Gyro Filter 1 | | | |
| 1) Engage the yaw damper and | | | |
| make sure the hydraulics are | | | |
| on. | | | |
| 2) Push the GO switch. Make a | 1 | ON | OFF |
| note after 1 second. | | | |
| (c) Test 2 - Engage Null | | | |
| 1) Engage the yaw damper and | | | |
| make sure the hydraulics are | | | |
| on (from Test 1). | | | |
| 2) Push the GO switch. Make a | 2 | ON | OFF |
| note after 6 seconds. | | | |
| (d) Test 3 - Rate to Rudder | | | |
| (Displacement) | | | |
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：737-300 400 500 AMM 飛機維護手冊 自動飛行 AUTOFLIGHT 2(77)
