3. Fault Confirmation
__________________
A. Not applicable, the fault is evident.
4. Fault Isolation
_______________
R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210,
A. If the fault identified by the crew observation:
MCDU 1 and MCDU 2 shows AIDS (TIME OUT)
(1) Do the DMU (1TV) Fault Monitoring Test (Ref. AMM TASK 31-36-00-710-001).
R (a) If the test gives a different maintenance message, do the trouble R shooting procedure related to the maintenance message.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : ALL ∞∞31-36-00∞∞∞∞∞∞∞∞∞∞Page 263
May 01/05 CES
(2) If the fault continues:
- do a check and repair the aircraft wiring from the MCDU 1 (3CA1), MCDU 2 (3CA2), CFDIU (1TW) and Printer (4TW) to the DMU (1TV) (Ref. ASM 31-36/01): MCDU 1 Connector 11 to DMU Connector AA/11E MCDU 1 Connector 12 to DMU Connector AA/11F MCDU 2 Connector 11 to DMU Connector AA/11E MCDU 2 Connector 12 to DMU Connector AA/11F CFDIU Connector AB/3F to DMU Connector AA/11E CFDIU Connector AB/3G to DMU Connector AA/11F Printer Connector C to DMU Connector AA/11E Printer Connector D to DMU Connector AA/11F
(3) If the fault continues:
- replace the DMU (1TV) (Ref. AMM TASK 31-36-34-000-001) and (Ref. AMM TASK 31-36-34-400-001).
(4) If the fault continues:
- do the fault isolation procedure (Ref. TASK 31-32-00-810-934) of the MCDU 1 (3CA1), MCDU 2 (3CA2), CFDIU (1TW) and Printer (4TW).
B. Do the DMU (1TV) Fault Monitoring Test (Ref. AMM TASK 31-36-00-710-001) to check the correct operation (no maintenance message is shown).
R **ON A/C 106-149, 211-299, 301-399, 401-499,
A. If the fault identified by the crew observation:
MCDU 1 and MCDU 2 shows AIDS (TIME OUT)
(1) Do the FDIMU (10TV) Fault Monitoring Test (Ref. AMM TASK 31-36-00-740-012).
(a) If the test gives a different maintenance message, do the trouble shooting procedure related to the maintenance message.
(2) If the fault continues:
- do a check and repair the aircraft wiring from the MCDU 1 (3CA1), MCDU 2 (3CA2), CFDIU (1TW) and Printer (4TW) to the FDIMU (10TV) (Ref. ASM 31-36/01):
MCDU 1 Connector 11 to FDIMU Connector AA/11E MCDU 1 Connector 12 to FDIMU Connector AA/11F MCDU 2 Connector 11 to FDIMU Connector AA/11E MCDU 2 Connector 12 to FDIMU Connector AA/11F CFDIU Connector AB/3F to FDIMU Connector AA/11E CFDIU Connector AB/3G to FDIMU Connector AA/11F Printer Connector C to FDIMU Connector AA/11E Printer Connector D to FDIMU Connector AA/11F
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞31-36-00∞∞∞∞∞∞∞∞∞∞Page 264
Aug 01/05 CES
(3) If the fault continues:
- replace the DMU/FDIU (FDIMU) (10TV) (Ref. AMM TASK 31-36-34-000-002) and (Ref. AMM TASK 31-36-34-400-002).
(4) If the fault continues:
- do the fault isolation procedure (Ref. TASK 31-32-00-810-934) of the MCDU 1 (3CA1), MCDU 2 (3CA2), CFDIU (1TW) and Printer (4TW).
B. Do the FDIMU (10TV) Fault Monitoring Test (Ref. AMM TASK 31-36-00-740-012) to check the correct operation (no maintenance message is shown).
FDIMU receives no data from the LGCIU 1 (5GA1) or LGCIU 2 (5GA2)
1. Possible Causes
_______________
- LGCIU-1 (5GA1)
- LGCIU-2 (5GA2)
- DMU/FDIU (FDIMU) (10TV)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-36-00-740-012 Test of the FDIMU (10TV)
AMM 31-36-34-000-002 Removal of the FDIU/DMU (FDIMU) (10TV)
AMM 31-36-34-400-002 Installation of the FDIU/DMU (FDIMU) (10TV)
AMM 32-69-00-740-001 BITE Check Landing Gear Control Interface Unit
(LGCIU) using MCDU to Ensure that Continuous BITE is Operative ASM 31-37/01 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 指示和記錄系統 1(98)
