1. Possible Causes
_______________
- DMU (1TV)
- wiring
- ECU Eng 1
- ECU Eng 2
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 31-36-00-710-001 Test of the DMU (1TV)
AMM 31-36-34-000-001 Removal of the Data Management Unit (DMU) (1TV)
AMM 31-36-34-400-001 Installation of the Data Management Unit (DMU) (1TV)
AMM 73-21-60-720-040 Functional Test of the Electronic Control Unit (ECU)
ASM 31-37/01
3. Fault Confirmation
__________________
A. Do the DMU (1TV) fault monitoring test (Ref. AMM TASK 31-36-00-710-001). NOTE : Make sure that the circuit breakers 1TV, 2JH1, 3JH1, 4KS1, 2JH2,
____ 3JH2, 4KS2 on the panel 121VU and 1JH, 2KS1, 2KS2 on the panel 49VU are closed during the test.
4. Fault Isolation
_______________
A. If the test gives the maintenance message:
- ECU1 (4000KS)/DMU (1TV) or
- ECU2 (4000KS)/DMU (1TV).
(1) Do the functional test of the ECU (Ref. AMM TASK 73-21-60-720-040).
(a) If the test gives a different maintenance message, you can find the related trouble shooting procedure in the applicable Page Block 101.
(2) If the fault continues:
- do a check and repair the wiring from the ECU Eng 1 or ECU Eng 2 to the DMU (1TV) (Ref. ASM 31-37/01):
ECU ENG 1 Connector J3/24 to DMU Connector AA/8K ECU ENG 1 Connector J3/11 to DMU Connector AA/9K
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞31-36-00∞∞∞∞∞∞∞∞∞∞Page 223
201-210, May 01/05 CES
ECU ENG 1 Connector J3/12 to Ground
or ECU ENG 2 Connector J3/24 to DMU Connector AB/8K ECU ENG 2 Connector J3/11 to DMU Connector AB/9K ECU ENG 2 Connector J3/12 to Ground
(3) If the fault continues:
- replace the DMU (1TV) (Ref. AMM TASK 31-36-34-000-001) and (Ref. AMM TASK 31-36-34-400-001).
B. Do the test given in para. 3.
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 001-049, 051-099, 101-105, 151-199, ∞∞31-36-00∞∞∞∞∞∞∞∞∞∞Page 224
201-210, May 01/05 CES
DMU receives no data from the ECB (59KD)
1. Possible Causes
_______________
- ECB (59KD)
- DMU (1TV)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 31-36-00-710-001 Test of the DMU (1TV)
AMM 31-36-34-000-001 Removal of the Data Management Unit (DMU) (1TV)
AMM 31-36-34-400-001 Installation of the Data Management Unit (DMU) (1TV)
AMM 49-61-34-400-001 Installation of the Electronic Control Box (ECB)
(59KD) (GTCP 36-300)
ASM 31-37/01
3. Fault Confirmation
__________________
A. Do the DMU (1TV) fault monitoring test (Ref. AMM TASK 31-36-00-710-001). NOTE : Make sure that the circuit breakers 1TV, 1KD, 2KD on the panel
____
121VU are closed during the test.
4. Fault Isolation
_______________ R **ON A/C 001-049, 051-099, 101-105, 151-158, 201-209,
A. If the test gives the maintenance message:
- NO ECB DATA
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 指示和記錄系統 1(84)
