- do a check and if necessary repair the wiring between the BMC-1 (1HA1) or BMC-2 (1HA2) and the DMU/FDIU (FDIMU) (10TV) (Ref. ASM 31-37/01):
BMC 1 Connector AA/10C to FDIMU Connector AA/1J
BMC 1 Connector AA/11C to FDIMU Connector AA/1K
BMC 1 Connector AA/12C to Ground
or
BMC 2 Connector AB/10C to FDIMU Connector AB/1J
BMC 2 Connector AB/11C to FDIMU Connector AB/1K
BMC 2 Connector AB/12C to Ground
(3) If the fault continues:
- replace the FDIMU (10TV) (Ref. AMM TASK 31-36-34-000-002) and (Ref. AMM TASK 31-36-34-400-002).
B. Do the test given in para. 3.
FDIMU receives no data from the ECU (4000KS) or EEC (4000KS)
1. Possible Causes
_______________
- DMU/FDIU (FDIMU) (10TV)
- wiring
- ECU Eng 1
- ECU Eng 2
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
AMM 31-36-00-740-012 Test of the FDIMU (10TV)
AMM 31-36-34-000-002 Removal of the FDIU/DMU (FDIMU) (10TV)
AMM 31-36-34-400-002 Installation of the FDIU/DMU (FDIMU) (10TV)
AMM 73-21-60-720-040 Functional Test of the Electronic Control Unit (ECU)
ASM 31-37/01
3. Fault Confirmation
__________________
A. Do the FDIMU (10TV) fault monitoring test (AIDS-part) (Ref. AMM TASK 31-36-00-740-012).
NOTE : Make sure that the circuit breakers 5TV, 2JH1, 3JH1, 4KS1, 2JH2,
____ 3JH2, 4KS2 on the panel 121VU and 1JH, 2KS1, 2KS2 on the panel 49VU are closed during the test.
4. Fault Isolation
_______________
A. If the test gives the maintenance message:
- ECU1 (4000) / FDIMU (10TV) or
- ECU2 (4000) / FDIMU (10TV)
(1) Do the functional test of the ECU (Ref. AMM TASK 73-21-60-720-040).
(a) If the test gives a different maintenance message, you can find the related trouble shooting procedure in the applicable Page Block 101.
(2) If the fault continues:
- do a check and if necessary repair the wiring between the ECU Eng 1 or ECU Eng 2 and the DMU/FDIU (FDIMU) (10TV) (Ref. ASM 31-37/01):
ECU ENG 1 Connector J3/24 to FDIMU Connector AA/8K
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1R EFF : 106-149, 211-299, 301-399, 401-499, ∞∞31-36-00∞∞∞∞∞∞∞∞∞∞Page 278
Aug 01/05 CES ECU ENG 1 Connector J3/11 to FDIMU Connector AA/9K ECU ENG 1 Connector J3/12 to Ground or ECU ENG 2 Connector J3/24 to FDIMU Connector AB/8K ECU ENG 2 Connector J3/11 to FDIMU Connector AB/9K ECU ENG 2 Connector J3/12 to Ground
(3) If the fault continues:
- replace the FDIMU (10TV) (Ref. AMM TASK 31-36-34-000-002) and (Ref. AMM TASK 31-36-34-400-002).
B. Do the test given in para. 3.
TASK 31-36-00-810-904
FDIMU receives no data from the ECB (59KD)
1. Possible Causes
_______________
- ECB (59KD)
- DMU/FDIU (FDIMU) (10TV)
- wiring
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 31-36-00-740-012 Test of the FDIMU (10TV)
AMM 31-36-34-000-002 Removal of the FDIU/DMU (FDIMU) (10TV)
AMM 31-36-34-400-002 Installation of the FDIU/DMU (FDIMU) (10TV)
AMM 49-00-00-710-001 Self-Test of the ECB (59KD) (GTCP 36-300)
ASM 31-37/01
3. Fault Confirmation
__________________
A. Do the FDIMU (10TV) fault monitoring test (AIDS-part) (Ref. AMM TASK 31-36-00-740-012).
NOTE : Make sure that the circuit breakers 5TV, 1KD, 2KD on the panel
____
121VU are closed during the test.
4. Fault Isolation
_______________
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 指示和記錄系統 1(102)
