1 If there is no continuity, repair the wiring.
_
 2 If there is continuity :
_
 - do a check of the wiring from the relay (36CE2) A/A2 to the C/B (19CE2) (Ref. ASM 27-93/12).
 a If there is no continuity, repair the wiring.
_
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞27-93-00∞∞∞∞∞∞∞∞∞∞Page 289
 May 01/01 CES

R R R  b_ If there is continuity : - do a check and repair the wiring from the XDCR MON MOT 2 (V1, V2) signal, of the THS actuator (9CE) to the ELAC 1 (2CE1) (Ref. ASM 27-93/12). - do a check and repair the wiring from the XDCR COM MOT 2 (V1, V2) signal, of the THS actuator (9CE) to the ELAC 1 (2CE1) (Ref. ASM 27-93/12).
 B. Do the tests given in Para. 3.

 Failure of the THS Actuator Servo Motor 2 for the ELAC 1
 1. Possible Causes
_______________
 - RELAY-PITCH TRIM ACTUATOR MOTOR 2 SPLY (36CE2)

 - ELAC-1 (2CE1)

 - RELAY-PITCH TRIM ACTUATOR MOTOR 2 SPLY (36CE2)

 - Electronic Module 2

 - wiring of K3-1 signal from the ELAC 1 (2CE1) to the first terminal block

 - wiring of the DSI-49 signal from the ELAC 1 (2CE1) to the ELAC 1 (2CE1)

 - wiring of the K3-1B signal from the ELAC 1 (2CE1) to the first terminal block

 - wiring of the relay (36CE2) to the ELAC 1 (2CE1) and to the THS actuator (9CE)

 - wiring of the fault signal from the ELAC 1 (2CE1) to the first terminal block

 2. Job Set-up Information
______________________
 A. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
31-32-00-810-932 Failure of the Discrete Links 31-32-00-810-933 Failure of the Analog Links IPC 27920803020 AMM 27-44-57-000-002 Removal of the Electronic Modules of the Pitch Trim
 Actuator AMM 27-44-57-400-002 Installation of the Electronic Modules of the Pitch
 Trim Actuator
 AMM 27-93-34-000-001 Removal of the ELAC (2CE1,2CE2)
 AMM 27-93-34-400-001 Installation of the ELAC (2CE1,2CE2)
 AMM 27-96-00-710-022 Operational Test of the THS Actuator Electrical

 Control (Activation for BITE Test)
R  AMM 27-96-00-740-001 BITE Test of the EFCS (Ground Scanning) ASM 27-93/12 ASM 27-93/13 ASM 27-94/12 ASM 27-94/13
 3. Fault Confirmation
__________________
 A. Test
 (1) Do the operational test of the THS actuator electrical control (Ref. AMM TASK 27-96-00-710-022).
 NOTE : Do the ground setting only with the ELAC 1.
____
 「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞27-93-00∞∞∞∞∞∞∞∞∞∞Page 291
 Aug 01/99 CES

 (2) Do the BITE test of the EFCS (ground scanning) (Ref. AMM TASK 27-96-00-740-001).
 NOTE : Wait 60 seconds before you start the BITE test.
____
 4. Fault Isolation
_______________
 A. If the BITE test gives the maintenance message:
 THS ACTR SERVO MOT2 9CE OF ELAC1

R (1) Remove the RELAY-PITCH TRIM ACTUATOR MOTOR 2 SPLY (36CE2) (Ref. IPC
R 27920803020).

R (2) Do a check of the resistance between pin X1 and X2 of the relay.

R (a) if the resisance is less than 280 ohms:
R - replace the RELAY-PITCH TRIM ACTUATOR MOTOR 2 SPLY (36CE2).
R - replace the ELAC-1 (2CE1) (Ref. AMM TASK 27-93-34-000-001)
R (Ref. AMM TASK 27-93-34-400-001).

R (b) If the resistance is more than 400 ohms:
R - replace the RELAY-PITCH TRIM ACTUATOR MOTOR 2 SPLY (36CE2).

R (c) If the resistance is between 280 and 400 ohms:
R - install the RELAY-PITCH TRIM ACTUATOR MOTOR 2 SPLY (36CE2)
R - see Para (3).

R (3) If the fault continues:

 - replace the ELAC-1 (2CE1), (Ref. AMM TASK 27-93-34-000-001) and (Ref. AMM TASK 27-93-34-400-001).
R (4) If the fault continues:
 - do the trouble shooting procedure (Ref. TASK 31-32-00-810-932) related to the DSI 24 discret input signal of the ELAC 1 and SEC 1 (Ref. ASM 27-93/12) (Ref. ASM 27-93/13) (Ref. ASM 27-94/12) (Ref. ASM 27-94/13) and

 - do the trouble shooting procedure (Ref. TASK 31-32-00-810-933) related to the ANI 2-3 analog input signal of the ELAC 1 and SEC 1 (Ref. ASM 27-93/12) and (Ref. ASM 27-94/12).

R (5) If the fault continues:
 - replace the RELAY-PITCH TRIM ACTUATOR MOTOR 2 SPLY (36CE2) Ref. IPC 27920803.
R (6) If the fault continues:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320 Trouble Shooting Manual 排故手冊 飛行操縱 3(16)