B. Do the operational test and the BITE test given in Para. 3.
Loss of the Pitch Signal on the F/O Side Stick for the ELAC 1
1. Possible Causes
_______________
- ELAC-1 (2CE1)
- SSTU-PITCH CTL, F/O (4CE4)
- wiring from the ELAC 1 (2CE1) to the SSTU (4CE4)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 27-92-41-000-002 Removal of the Transducer Units (4CE1,4CE2,4CE3,4CE4) AMM 27-92-41-400-002 Installation of the Transducer Units
(4CE1,4CE2,4CE3,4CE4)
AMM 27-93-34-000-001 Removal of the ELAC (2CE1,2CE2)
AMM 27-93-34-400-001 Installation of the ELAC (2CE1,2CE2)
AMM 27-96-00-710-020 Operational Test of the Side Stick Assembly
(Activation for the BITE Test) R AMM 27-96-00-740-001 BITE Test of the EFCS (Ground Scanning) ASM 27-92/14
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the side stick assembly (activation for the BITE test) (Ref. AMM TASK 27-96-00-710-020).
(2) Do the BITE test of the EFCS (Ground Scanning) (Ref. AMM TASK 27-96-00-740-001).
4. Fault Isolation
_______________
A. If the BITE test gives the maintenance message:
ELAC1 OR INPUT OF F/O PITCH CTL SSTU 4CE4
- replace the ELAC-1 (2CE1), (Ref. AMM TASK 27-93-34-000-001) and (Ref. AMM TASK 27-93-34-400-001).
(1) If the fault continues:
- replace the SSTU-PITCH CTL, F/O (4CE4), (Ref. AMM TASK 27-92-41-000-002) and (Ref. AMM TASK 27-92-41-400-002).
(2) If the fault continues:
- do a check and repair the wiring from the ELAC 1 (2CE1) to the SSTU (4CE4) (Ref. ASM 27-92/14).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞27-93-00∞∞∞∞∞∞∞∞∞∞Page 207
Aug 01/99 CES
B. Do the operational test and the BITE test given in Para. 3.
Loss of the Roll Signal on the CAPT Side Stick for the ELAC 2
1. Possible Causes
_______________
- ELAC-2 (2CE2)
- SSTU-ROLL CTL, CAPT (4CE1)
- wiring from the ELAC 2 (2CE2) to the SSTU (4CE1)
2. Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
AMM 27-92-41-000-002 Removal of the Transducer Units (4CE1,4CE2,4CE3,4CE4) AMM 27-92-41-400-002 Installation of the Transducer Units
(4CE1,4CE2,4CE3,4CE4)
AMM 27-93-34-000-001 Removal of the ELAC (2CE1,2CE2)
AMM 27-93-34-400-001 Installation of the ELAC (2CE1,2CE2)
AMM 27-96-00-710-020 Operational Test of the Side Stick Assembly
(Activation for the BITE Test) R AMM 27-96-00-740-001 BITE Test of the EFCS (Ground Scanning) ASM 27-92/12
3. Fault Confirmation
__________________
A. Test
(1) Do the operational test of the side stick assembly (activation for the BITE test) (Ref. AMM TASK 27-96-00-710-020).
(2) Do the BITE test of the EFCS (Ground Scanning) (Ref. AMM TASK 27-96-00-740-001).
4. Fault Isolation
_______________
A. If the BITE test gives the maintenance message:
ELAC2 OR INPUT OF CAPT ROLL CTL SSTU 4CE1
- replace the ELAC-2 (2CE2), (Ref. AMM TASK 27-93-34-000-001) and (Ref. AMM TASK 27-93-34-400-001).
(1) If the fault continues:
- replace the SSTU-ROLL CTL, CAPT (4CE1), (Ref. AMM TASK 27-92-41-000-002) and (Ref. AMM TASK 27-92-41-400-002).
(2) If the fault continues:
- do a check and repair the wiring from the ELAC 2 (2CE2) to the SSTU (4CE1) (Ref. ASM 27-92/12).
「一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一一1 EFF : ALL ∞∞27-93-00∞∞∞∞∞∞∞∞∞∞Page 209
Aug 01/99 CES
B. Do the operational test and the BITE test given in Para. 3.
Loss of the Roll Signal on the F/O Side Stick for the ELAC 2
1. Possible Causes
_______________
- ELAC-2 (2CE2)
- SSTU-ROLL CTL, F/O (4CE2)
- wiring from the ELAC 2 (2CE2) to the SSTU (4CE2) 中國(guó)航空網(wǎng) m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320 Trouble Shooting Manual 排故手冊(cè) 飛行操縱 2(121)
