-------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
missing U-shaped 
seal (removable) 
R 
R  END OF SB 72-071 
R 
R  G. Missing panel 
R  H. Loose bolts 
R  J. Subsurface linear 
R  impressions or 
R  wrinkles 
R  K. Voids 
R 
R 
R 
R 
R  L. Defects in the 
R  protective coating 
R  (initial Tedlar 
R  film, or paint) 
R  such as: 
R  (1) Missing 
R 
R  (2) Defects 
R  (dents, nicks, 
R  tears, 
R  flaking) that 
R  let show the 
R  inner skin 
R  M. Inner skin 
R  defects, such as:

Not serviceable
Not serviceable
No limits
Five per panels, 2 in.
(50.8 mm) apart, 0.12 in. (3 mm) Dia max,
0.012 in. (0.3 mm) max depth
No limits
No limits new U-shaped seal(Ref. TASK 72-23-00-000-026) or (Ref. TASK 72-23-00-400-026)
Tighten bolts
Serviceable criteria applied on new parts
Serviceable criteria applied on new parts
Remove the loose material with a sharp blade
Remove the loose material with a sharp blade
F 『 EEFF : ALL E Page 66572-23-00
 E E May 01/05 E E ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

 -------------------------------------------------------------------------------INSPECT/CHECK MAXIMUM REMARKS SERVICEABLE LIMITS -------------------------------------------------------------------------------
R  (1) Superficial 
R  defects 
R  (dents, nicks, 
R  tears, impact 
R  marks) not 
R  through the 
R  skin 
R  (2) Defects 
R  (tears, 
R  cracks, 
R  punctures) 
R  through the 
R  skin
 5. Close-up________
 Subtask 72-23-00-410-111
 A. Close Access

No limits with a total surface area less than 4 square in. (2580 sq mm) per panel
Not serviceable Remove the loose material with a sharp blade
Replace panel(s)
(Ref. TASK 72-23-00-000-026) and (Ref. TASK 72-23-00-400-026)

(1) Make sure that the work area is clean and clear of tool(s) and other items.

 (2) Close the thrust reverser doors (Ref. TASK 78-36-00-410-040): FOR 1000EM1 451AL, 452AR FOR 1000EM2 461AL, 462AR

 Subtask 72-23-00-440-067
 B. Make the thrust reverser serviceable (Ref. TASK 78-30-00-081-041).
 Subtask 72-23-00-410-112
 C. Close Access
 (1) Close the fan cowl doors (Ref. TASK 71-13-00-410-040):
 FOR 1000EM1
 437AL, 438AR
 FOR 1000EM2
 447AL, 448AR

 F 『 EEFF : ALL E Page 66672-23-00
 E E May 01/05 E E ECES E F 『 E C F M E E E E 56-5B E E E (2) Remove the access platform(s).

 (3) Remove the warning notice(s).
 F 『 EEFF : ALL E Page 66772-23-00
 E E May 01/05 ERE
ECES E

 F 『
 E C F M E
 E E
 E 56-5B E
 E E

 TASK 72-23-00-210-007
 Visual Inspection of the Junction Box
 1. Reason for the Job

__________________
 Self Explanatory

 2. Job Set-up Information

______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------
REFERENCE  QTY DESIGNATION
 -------------------------------------------------------------------------------
No specific  warning notice
 B. Consumable Materials
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
Material No.  CP2242 USA MIL-A-46106A
 RTV 732 (Ref. 70-30-00)

 C. Referenced Information
 -------------------------------------------------------------------------------
REFERENCE  DESIGNATION
 -------------------------------------------------------------------------------
71-13-00-010-040 Opening of the Fan Cowl Doors
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM ENGINE 發動機 2(6)