TASK 46-21-00-860-004
Programming of NEWARINCEU DSP (USER-DEFINED)
1.
Reason for the Job
__________________
Self Explanatory
2.
Job Set-up Information
______________________
A. Referenced Information
-------------------------------------------------------------------------------
REFERENCE DESIGNATION
-------------------------------------------------------------------------------
24-41-00-861-002 Energize the Aircraft Electrical Circuits from the External Power
R **ON A/C 153-158, 204-209,
46-21-00-991-008 Fig. 201
**ON A/C 153-156, 204-209,
Post SB 46-1013 For A/C 153-156,204-209,
46-21-00-991-008-A Fig. 201A
46-21-00-991-009-B Fig. 202A
**ON A/C 153-158, 204-209,
46-21-00-991-009-A Fig. 202B
46-21-00-991-011 Fig. 203
R 1EFF : 062-099, 153-158, 204-209, 1 46-21-00Page 232 1 1 May 01/05 1 1 1CES 1
**ON A/C 062-099, 153-158, 204-209,
3. Job Set-up
__________
Subtask 46-21-00-861-082
A. Energize the aircraft electrical circuits
(Ref. TASK 24-41-00-861-002)
Subtask 46-21-00-865-073
B. Make sure that this(these) circuit breaker(s) is(are) closed:
-------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU AUTO FLT/MCDU/1 11CA1 B01 49VU L/G/LGCIU/SYS1/NORM 1GA C09 121VU DATA/LOADER/SPLY 3TD J16 121VU AUTO FLT/MCDU/2 11CA2 N20 121VU HYDRAULIC/LGCIU/SYS2 2GA Q35
**ON A/C 153-158, 204-209,
121VU DLS&/DLRB/SPLY 5TD J15 121VU ATSU 1 3TX1 L16 121VU ATSU 1/SWTG 5TX1 L15
**ON A/C 062-099, 153-158, 204-209,
4. Procedure
_________
Subtask 46-21-00-869-056
A. Programming of NEWARINCEU DSP (USER-DEFINED) This procedure gives access to the USER-DEFINED1 page and shows how to load the NEWARINCEU service provider.
NOTE : The procedure that follows is applicable to each MCDU and is for
____ DSP USER-DEFINED1. For DSP USER-DEFINED2, use the indications between parentheses. The actions and the results of this procedure occur on the MCDU used.
1EFF : 062-099, 153-158, 204-209, 1 46-21-00Page 233 1 1 Aug 01/05R 1 1 1CES 1
R **ON A/C 153-158, 204-209,
(Ref. Fig. 201/TASK 46-21-00-991-008)
**ON A/C 153-156, 204-209,
Post SB 46-1013 For A/C 153-156,204-209,
(Ref. Fig. 201A/TASK 46-21-00-991-008-A, 202A/TASK 46-21-00-991-009-B) **ON A/C 153-158, 204-209,
(Ref. Fig. 202B/TASK 46-21-00-991-009-A, 203/TASK 46-21-00-991-011) R **ON A/C 062-099, 153-158, 204-209,
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
1.
Adjust the brightness of the MCDU screen.
2.
Push the MCDU MENU mode key.
3.
Push the line key adjacent to the ATSU indication.
4.
Push the line key adjacent to the COMM indication.
5.
Push the line key adjacent to the COMM INIT indication.
6.
Push the line key adjacent to the VHF3 SCAN MASK indication.
7.
Push the next page function key on the keyboard.
8.
Enter password "NEW DSP" with the keyboard.
The MCDU is on.
The MCDU MENU page comes into view.The ATSU DATALINK page comes into view.
The COMM MENU page comes into view.
The COMM INIT page comes into view.
The VHF3 SCAN MASK page 1/2 comes into
view.
The VHF3 SCAN MASK page 2/2 comes into
view.
The NEW DSP indication is shown in theMCDU scratchpad.
R 1EFF : 062-099, 153-158, 204-209, 1 46-21-00Page 234 1 1 May 01/05 1 1 1CES 1
-------------------------------------------------------------------------------ACTION RESULT -------------------------------------------------------------------------------
9.
Push line key 2R (3R).
10.
Enter each one of the NEWARINCEU parameters that follow:
NOTE : Only use alphanumeric
____ characters (from A to Z and from 0 to 9). Do not use dashes, dots or spaces. You must enter the DSP frequency in this format:
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM 信息系統 INFORMATION SYSTEMS(34)
