(3)
 Remove the blanking plugs from the fluid sampling valve (1) and the manifold.

 (4)
 Apply HYDRAULIC FLUIDS (Material No. 02-003) to the threads of the fluid sampling valve (1) and to the new 0-ring (2).

 (5)
 Put the O-ring (2) in position on the fluid sampling valve (1).

 (6)
 Install the fluid sampling valve (1) on the manifold.

 (7)
 TORQUE the fluid sampling valve (1) to between 1.77 and 1.88 m.daN

 (13.05 and 13.86 lbf.ft).

 (8)
 Make sure that the protective cap is tight.

 (9)
 Safety the protective cap to the valve body and the valve body to the manifold with lockwire, corrosion-resistant steel, 0.8 mm (0.032 in.) dia.

 Subtask 29-12-34-790-050
 B. Test
 (1)
 Remove the warning notices from the cockpit and the ground service panel.

 (2)
 Pressurize the reservoir of the Blue hydraulic system (Ref. TASK 29-14-00-614-001).

 (3)
 Make sure that the fluid level in the reservoir of the Blue hydraulic system is correct. Add fluid as necessary (Ref. TASK 12-12-29-611-001).

 (4)
 Pressurize the Blue hydraulic system (Ref. TASK 29-10-00-863-003).

 (5)
 Examine the connection of the fluid sampling valve (1) and the manifold and make sure that there are no leaks.

 (6)
 Depressurize the Blue hydraulic system (Ref. TASK 29-10-00-864-003).

 5. Close-up
________ Subtask 29-12-34-410-050
 A. Close Access
 (1)
 Remove the container.

 (2)
 Make sure that the work area is clean and clear of tool(s) and other items.

 (3)
 Close the access panel 195BB.

 (4)
 Close the access door 197EB. Subtask 29-12-34-865-052

 B.
 Remove the safety clip(s) and the tag(s) and close this(these) circuit breaker(s): 1831GQ, 1832GQ, 2701GJ, 2702GJ.

 VALVE - DRAIN (2264GM) - REMOVAL/INSTALLATION
_____________________________________________
 TASK 29-12-35-000-001
 Removal of the Reservoir Drain Valve (2264GM)
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking plugs No specific circuit breaker(s) safety clip(s) No specific container No specific warning notices
 B. Referenced Information
 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
29-00-00-864-001 Put the Related Hydraulic System in the Depressurized
 Configuration before Maintenance Action 29-00-00-910-002 Safety Procedures of the Hydraulic System 29-10-00-680-003 Drainage of the Reservoir of the Blue Hydraulic
 System 29-14-00-614-001 Depressurization of the Hydraulic Reservoirs 29-12-35-991-001 Fig. 401

 3. Job Set-up
__________ Subtask 29-12-35-865-050
 A. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------49VU HYD/HYD PWR/B WARN/& CTL 2702GJ C12 123VU B HYD/ELEC PUMP 2701GJ AB09
 Subtask 29-12-35-860-050
 B. Aircraft Maintenance Configuration
 WARNING : OBEY THE HYDRAULIC SAFETY PROCEDURES.

_______
 (1)
 Obey the hydraulic safety procedures (Ref. TASK 29-00-00-910-002).

 (2)
 Put warning notices in position to tell persons not to pressurize the Blue hydraulic system:

 -in the cockpit on the hydraulic section 40VU of the overhead panel, - on the ground service panel of the Blue hydraulic system.

 (3)
 Make sure that the Blue hydraulic system is depressurized and put it in the maintenance configuration. (Ref. TASK 29-00-00-864-001).

 (4)
 Depressurize the reservoir of the Blue hydraulic system (Ref. TASK 29-14-00-614-001).

 (5)
 Drain the reservoir of the Blue hydraulic system (Ref. TASK 29-10-00-680-003).

 (6)
 Put a container below the drain valve (2264GM). Subtask 29-12-35-010-050
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM HYDRAULIC POWER 液壓3(48)