(7)
 Loosen the pipe end-fitting (26) and disconnect the pipe (25) from
 the union (27).

 (8)
 Loosen the pipe end-fitting (2) and disconnect the tee connector (1) from the union (3).

 (9)
 Hold the manifold (17) and remove the five bolts (19) and the washers (20). Collect the five distance pieces (21) from between the manifold

 (17) and the structure.
 (10)
 Remove the manifold (17).

 (11)
 Put blanking plugs on the disconnected line ends and the manifold ports.

R 1EFF : 059-099, 102-149, 151-199, 201-299, 1 29-13-14Page 407 1301-399, 401-499, 1Aug 01/05 1 1 1CES 1

 **ON A/C ALL

 TASK 29-13-14-400-001
 Installation of the HP Manifold of the Yellow Hydraulic System
 WARNING : MAKE SURE THAT THE GROUND SAFETY-LOCKS ARE IN POSITION ON THE LANDING
_______ GEAR.
 1. Reason for the Job
__________________
 Self Explanatory
 2. Job Set-up Information
______________________
 A. Fixtures, Tools, Test and Support Equipment
 -------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific blanking plugs No specific container No specific warning notices No specific 1 BAG - PLASTIC No specific Torque Wrench : range 0.20 to 3.60 m.daN
 (2.00 to 26.00 lbf.ft) No specific Torque Wrench : range 1.00 to 10.00 m.daN
 (8.00
 to 75.00 lbf.ft) No specific Torque Wrench : range 2.00 to 20.00 m.daN

 (15.00 to 150.00 lbf.ft)

 B.
 Consumable Materials

 -------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 02-003  F NSA 307110 TYPE 4 HYDRAULIC FLUID (PHOSPHATE ESTER BASE) (Ref. 20-31-00)
 Material No. 09-013  USA MIL-PRF-81733 TYPE I CLASS A CORROSION INHIBITING BRUSH CONSISTENCY (Ref. 20-31-00)
 Material No. 16-003  F ASNB70720 COATING (OBSOLETE USE 16-021) (Ref. 20-31-00)
 1EFF : ALL 1 29-13-14Page 408 1 1 May 01/05R 1 1 1CES 1

 -------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 19-010  USA AMS 5687
 LOCKWIRE STAINLESS STEEL ANNEALED 0.8MM DIA
 (Ref. 20-31-00)
 C. Expendable Parts

 -------------------------------------------------------------------------------FIG.ITEM |DESIGNATION |IPC-CSN -------------------------------------------------------------------------------
7  back-up ring  29-13-14 02A-230
 9  O-rings  29-13-14 02A-270
 15  square-section seals  29-13-14 02 -130
 15  square-section seals  29-13-14 02A-170
 24  packing  29-13-14 02 -040
 24  O-ring  29-13-14 02A-080
 32  O-ring  29-13-14 02 -040
 33  back-up rings  29-13-14 20 -010
 33  back-up rings  29-13-14 20A-010
 34  O-ring  29-13-14 20 -020
 34  O-ring  29-13-14 20A-020
 38  backup-rings  29-13-14 02 -120
 38  backup-rings  29-13-14 02A-160
 40  square-section seals  29-13-14 02 -130
 40  square-section seals  29-13-14 02A-170
 50  square-section seals  29-13-14 02A-300
 51  square-section seal  29-13-14 02A-250
 52  back-up ring  29-13-14 02A-240
 53  O-ring  29-13-14 02A-220
 54  back-up rings  29-13-14 02 -120
 54  back-up rings  29-13-14 02A-160
 55  back-up rings  29-13-14 02 -110
 55  back-up rings  29-13-14 02A-150
 56  packings  29-13-14 02 -100
 56  O-rings  29-13-14 02A-140
 57  packings  29-13-14 02 -100
 57  O-rings  29-13-14 02A-140
 58  backup-rings  29-13-14 02 -110
 58  backup-rings  29-13-14 02A-150
 59  back-up rings  29-13-14 02A-280
 60  back-up rings  29-13-14 02A-290

 1EFF : ALL 1 29-13-14Page 409 1 1 May 01/05R 1 1 1CES 1

 D. Referenced Information
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM HYDRAULIC POWER 液壓3(107)