-------------------------------------------------------------------------------
REFERENCE DESIGNATION -------------------------------------------------------------------------------

R  **ON A/C 106-149, 211-299,
 23-11-36-991-001-C

R  **ON A/C 201-210,
R  23-11-36-991-001-A FOR FIN 4RE1 25-23-42-000-002 FOR FIN 4RE2 25-23-42-000-002
**ON A/C ALL
 3. Job Set-up
__________
 Subtask 23-11-36-860-051Fig. 401B
Fig. 401CRemoval of the Ceiling Panels - Aft Utility AreaRemoval of the Ceiling Panels - Aft Utility Area
 A. Aircraft Maintenance Configuration
 (1) Energize the aircraft electrical circuits
 (Ref. TASK 24-41-00-861-002).

 Subtask 23-11-36-865-053
 B. Make sure that this(these) circuit breaker(s) is(are) closed:
 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------

R  **ON A/C 001-049, 101-105, 151-199,
 49VU COM/HF1 1RE1 HA14 R **ON A/C 051-099, 106-149, 201-299, 301-399,
 49VU COM HF1  1RE1 HA14
 1EFF : ALL 1 23-11-36Page 402 1 1 May 01/05 1 1 1CES 1 -------------------------------------------------------------------------------PANEL DESIGNATION IDENT. LOCATION -------------------------------------------------------------------------------

R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210, 301-399,
 121VU COM NAV/HF2 1RE2 L13 **ON A/C ALL
 Subtask 23-11-36-860-052
 C. Aircraft Maintenance Configuration
 (1)
 Make sure that the lights on the face of the transceiver are not on.

 (2)
 On the related Radio Management Panel (RMP), put the ON/OFF selector switch to ON. Make sure that the RMP shows the last frequency and function used.

 (3)
 Push the related HF1 (HF2) pushbutton switch and monitor that the integrated green LED comes on. Additionally the white SEL indicator light comes on.

 (4)
 With the dual selector knob set a station frequency in the STBY/CRS window.

 (5)
 Push the transfer pushbutton switch (left-right arrow) between the two display windows to start the set frequency. This sets the antenna coupler to its 'home' position.

 NOTE : You must not transmit on this set frequency. If you activate
____ the transceiver to transmit, the 'home' position of the coupler is discarded.
 NOTE : The HF antenna coupler must not be removed before it is set to
____
 its 'home' position.

 NOTE : If you activated the transmitter by mistake, do the procedure
____
 described above again.

 (6) On the related RMP, set the ON/OFF selector switch to OFF.
 1EFF : ALL 1 23-11-36Page 403 1 1 May 01/05 1 1 1CES 1 Subtask 23-11-36-865-050

 D. Open, safety and tag this(these) circuit breaker(s):
 -------------------------------------------------------------------------------
PANEL DESIGNATION IDENT. LOCATION
 -------------------------------------------------------------------------------
**ON A/C 001-049, 101-105, 151-199,
 49VU COM/HF1 1RE1 HA14 **ON A/C 051-099, 106-149, 201-299, 301-399,
 49VU COM HF1 1RE1 HA14 **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210, 301-399,
 121VU COM NAV/HF2 1RE2 L13 R **ON A/C 001-049, 051-099, 101-105, 151-199, 201-210, 301-399, 401-499,
 Subtask 23-11-36-010-050
 E. Get Access
 FOR 4RE1

 (1)
 Remove the ceiling panel 261CC in the Aft cabin utility area (Ref. TASK 25-23-42-000-002). FOR 4RE2

 (2)
 Remove the ceiling panel 262CC in the Aft cabin utility area (Ref. TASK 25-23-42-000-002).

 **ON A/C 106-149, 211-299,
 Subtask 23-11-36-010-050-A
 E. Get Access
 (1) Remove the ceiling panel 261CC in the Aft cabin utility area (Ref. TASK 25-23-42-000-002).
 1EFF : ALL 1 23-11-36Page 404 1 1 Aug 01/05 1 1 1CES 1 **ON A/C ALL

 4. Procedure
_________
 **ON A/C 001-049, 101-105, 151-199,

 (Ref. Fig. 401/TASK 23-11-36-991-001-B) R **ON A/C 051-099, 301-399, 401-499,
 (Ref. Fig. 401A/TASK 23-11-36-991-001)
 **ON A/C 106-149, 211-299,

 (Ref. Fig. 401B/TASK 23-11-36-991-001-C)
 **ON A/C 201-210,

 (Ref. Fig. 401C/TASK 23-11-36-991-001-A)
 **ON A/C ALL

 Subtask 23-11-36-020-050
 A. Removal of the HF Antenna Coupler
 (1)
 Disconnect the electrical connectors (2) from the antenna coupler (1).

 (2)
 Put blanking caps on the disconnected electrical connectors.
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊1(61)