曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

R 
R  MANUAL*  This action is displayed while the SDU is in the WAIT 
R  USER INPUT state. Selection of line key 6R in this state 
R  initiates a manual log-on using the displayed SAT ID, 
R  GES ID and antenna selection control. 
R  (b) Log-on mode is displayed adjacent to line key 5R except when the 
R  log-on status is WAIT USER INPUT. Mode is displayed as either 
R  AUTO or USER COMMANDED. Log-on mode is initialized per the owner 
R  preference table. When Log-on mode is AUTO, the AES selects the 
R  most preferred Satellite/GES per the GES preference table. 
R  When the Log-on status is WAIT USER INPUT, AUTO LOG-ON* is 
R  displayed using the MANDATORY ACTION color type adjacent to line 
R  key 5R. See description of WAIT USER INPUT state above. 
R  (c) Satellite ID as currently locked onto or being scanned by the 
R  SDU, are displayed adjacent to line key 3R. The satellite ID is 
R  displayed as the name of the region as listed below. While in the 
R  WAIT USER INPUT state a : prompt is displayed and selecting line 
R  key 3R cycles through the available satellite regions. This also 
R  causes the GES displayed next to line key 4R to be set to the 
R  first GES available in that satellite region. Selecting line key 
R  6R (MANUAL*) initiates a manual log-on to the specified Satellite 
R  and GES. When in any other state, these numbers are displayed 
R  without the : prompt and are not available for user entry. 
R  00 - Atlantic West 
R  01 - Atlantic East 
R  02 - Pacific 
R  03 - Indian

 

R  (d) GES ID as currently locked onto or being scanned by the SDU, are 
R  displayed adjacent to line key 4R. The GES ID is displayed using 
R  the textual labels listed below, or represented in octal, range 
R  00-376 is not listed in the table. While the AES is in the TUNING 
R  TO SAT portion of the log-on process, the GES ID is displayed as 
R  dashes. While in the WAIT USER INPUT state a : prompt is 
R  displayed and selecting line key 4R cycles through the available 
R  GES IDs within the selected satellite region. Selecting line key 
R  6R (START MANUAL) initiates a manual log-on to the specified 
R  Satellite and GES. When in any other state, these numbers are 
R  displayed without the : prompt and are not available for user 
R  entry. 
R 
R  Atlantic West: 
R  001 - Goonhilly 
R  002 - Southbury 
R  003 - Laurentides 
R  004 - Eik 
R  005 - Aussaguel 
R 
R  Atlantic East: 
R  101 - Goonhilly 
R  103 - Aussaguel 
R  104 - Eik 
R  105 - Fucino 
R 
R  Pacific: 
R  201 - Sentosa 
R  202 - Santa Paula 
R  203 - Yamaguchi 
R  205 - Perth 
R  206 - Niles Canyon 
R  207 - Brunei 
R  210 - Kumsan 
R 
R  Indian: 
R  301 - Eik 
R  302 - Nunthaburi 
R  303 - Aussaguel 
R  305 - Perth 
R  306 - Yamaguchi 
R  307 - Brunei 
R  310 - Sentosa 
R  312 - Fucino 
R

 

R  (e) Channel number locked onto, or being scanned by the SDU is 
R  displayed adjacent to line key 1R. The channel number is a 
R  decimal representation, range 8000-19600. This item is not 
R  displayed while in the WAIT USER INPUT state. If no valid 
R  information is being received, the data field is zero. 
R  (f) Doppler correction in HZ is displayed adjacent to line key 3L. 
R  This item is not displayed while in the WAIT USER INPUT state. 
R  (g) Signal Quality is displayed adjacent to and below line key 2L. 
R  The display range is 00.0 to 99.9, with typical values being in 
R  the range of 10.0 to 60.0. If no P-channel is being received, 
R  this field displays 00.0. This item is not displayed while in the 
R  WAIT USER INPUT state. 
R  (h) The Beam ID number is a decimal representation, range 0 - 63 as 
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM Communications 通訊1(132)