20-CONTENTS Page 6 Aug 01/05 R CES
STANDARD PRACTICES - AIRFRAME - GENERAL - DESCRIPTION AND OPERATION
___________________________________________________________________
1.
General
_______ The airframe standard practices chapter contains information on the use and application of aircraft maintenance and repair processes which are not specifically covered in other chapters of the Aircraft Maintenance Manual. It also gives the list of materials required for servicing and maintenance operations.
2.
Standards Manual
________________ Information related to the various standards effective for all AIRBUS models are given in a separate manual called: STANDARDS MANUAL. The STANDARDS MANUAL contains information about all product/semi-finished product standards approved by the AIRBUS partners for the AIRBUS programs, as well as about the proprietary parts and the suppliers qualified for those parts. Moreover, the STANDARDS MANUAL contains a selection of the basic standards used on the AIRBUS programs. Standard parts which are not found in the STANDARDS MANUAL shall not be used without prior approval by AIRBUS INDUSTRIE. The STANDARDS MANUAL assists the customer with respect to information about the identification of standard parts and their procurement in co-operation with the AIRBUS INDUSTRIE spare parts center AIRSPARES.
3.
Process and Material Specification Manual
_________________________________________ The PROCESS AND MATERIAL SPECIFICATION MANUAL provides basic information on manufacturing processes and materials which are called up in engineering drawings and AIRBUS INDUSTRIE documentation. It is designed to assist operators in producing their own workshop documents necessary to perform work on in-service AIRBUS aircraft. The quality of such work is the responsability of the Operator.
1EFF : ALL 1 20-00-00Page 1 1 1 Feb 01/98 1 1 1CES 1
SAFETY PRACTICES - DESCRIPTION AND OPERATION
____________________________________________
1. General
_______
This section gives the information related to the safety practices of:
-wirelocking (Ref. ATA 20-11)
WIRELOCKING - MAINTENANCE PRACTICES
___________________________________
TASK 20-11-11-911-001 WIRELOCKING WARNING : CUT, REMOVE AND DISCARD THE LOCKWIRE AS YOU DO THE TASK. LOOSE
_______ LOCKWIRE CAN CUT OR BLIND YOU.
1. Reason for the Job
__________________
The lockwire is installed to put tension on the wire when the parts become loose.
2. Job Set-up Information
______________________
A. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
Material No. 05-002 USA MIL-P-8116 PUTTY, ZINC CHROMATE GENERAL PURPOSE (Ref. 20-31-00) Material No. 05-027C X (Ref. 20-31-00)
B. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
20-11-11-991-001 Fig. 201
3. Job Set-up
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STANDARD PRACTICES-AIRFRAME(7)
