TASK 20-23-11-300-001
Repair of the Hydraulic Tubes with PERMASWAGE Fittings
1. Reason for the Job
__________________
Self Explanatory
2. Job Set-up Information
______________________
A. Fixtures, Tools, Test and Support Equipment
-------------------------------------------------------------------------------REFERENCE QTY DESIGNATION -------------------------------------------------------------------------------
No specific scotch-brite pad No specific Grade 240 emery cloth No specific Grade 400 emery cloth No specific PERMASWAGE repair kit DLT series or D12000 series
tools (vendor code F6087)
B. Consumable Materials
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R Material No. 02-003 F NSA 307110 TYPE 4 HYDRAULIC FLUID (PHOSPHATE ESTER BASE) (Ref. 20-31-00)
Material No. 03-001 USA MIL-PRF-7870
MINERAL OIL (LOW TEMP) (Ref. 20-31-00)
Material No. 11-003 USA ASTM D 740
METHYL-ETHYL-KETONE (Ref. 20-31-00)
Material No. 13-002 USA MIL-C-5541 MIL-C-81706 CLASS I/A
CHEMICAL CONVERSION COATING YELLOW ALUMINUM
(Ref. 20-31-00)
Material No. 16-001C C Z-12.105
POLYURETHANE PRIMER (Ref. 20-31-00)
Material No. 16-020 C Z-12.120
WASH PRIMER (Ref. 20-31-00)
C. Referenced Information
-------------------------------------------------------------------------------REFERENCE DESIGNATION -------------------------------------------------------------------------------
R 12-12-29-611-001
R 12-12-29-611-002
R
20-23-11-200-001
R 29-00-00-870-001
R
R 29-00-00-870-002
R
R 29-00-00-870-003
R
R 29-00-00-870-004
R
R 29-00-00-870-005
R
R 29-00-00-870-006
R
R 29-00-00-870-007
R
R 29-00-00-870-008
R
R 29-00-00-870-009
R
R 29-10-00-863-001
R 29-10-00-863-002
R 29-10-00-863-003
R
R 29-14-00-614-002
R
R 32-42-00-870-001
R 32-43-00-612-001
R
R 32-43-00-870-002
R
20-23-11-991-001
20-23-11-991-073
20-23-11-991-043
20-23-11-991-002
20-23-11-991-003
20-23-11-991-004
20-23-11-991-005
20-23-11-991-006
Fill the Hydraulic Fluid Reservoir with a Hand Pump Fill the Hydraulic Fluid Reservoir with a Hydraulic Service CartPermissible Damage and Defects on Hydraulic Tubing Bleeding Procedure of the Green Hydraulic System Upstream of the Engine Pump Bleeding Procedure of the Green Hydraulic System Upstream of the PTU Bleeding Procedure of the Green Hydraulic System Downstream of the Engine Pump Bleeding Procedure of the Yellow Hydraulic System Upstream of the Engine Pump Bleeding Procedure of the Yellow Hydraulic System Upstream of the PTU Bleeding Procedure of the Yellow Hydraulic System Upstream of the Yellow E-Pump Bleeding Procedure of the Yellow Hydraulic System Downstream of the Engine Pump Bleeding Procedure of the Blue Hydraulic System Upstream of the Blue E-Pump Bleeding Procedure of the Blue Hydraulic System Downstream of the Blue E-Pump Pressurize the Green Hydraulic System Pressurize the Yellow Hydraulic System Pressurize the Blue Hydraulic System with a Ground Power Supply Pressurization of the Hydraulic Reservoirs through the Ground Connector Bleeding of the Normal Braking at the Brake Units Filling and bleeding of the Low Pressure Control System of the Alternate Braking Bleeding of the High Pressure Alternate Braking SystemFig. 208Fig. 209Fig. 210Fig. 211Fig. 212Fig. 213Fig. 214Fig. 215 -------------------------------------------------------------------------------REFERENCE DESIGNATION ------------------------------------------------------------------------------- 中國航空網 m.k6050.com 航空翻譯 www.aviation.cn 本文鏈接地址：A320飛機維護手冊 AMM STANDARD PRACTICES-AIRFRAME(26)
