R  Minimum Distances Figure 201/TASK 20-23-14-991-001
 1EFF : 1 1 1CES  ALL  1 111 20-23-14 Page 203 Feb 01/99

R  (1) Installation of lacing tape on pipe runs. 
R  (Ref. Fig. 202/TASK 20-23-14-991-002) 
R  (a) Attach the lines with lacing tape MISCELLANEOUS (Material No. 19-
002). 
R  (b) Finish the lacing with a reef knot. Tighten the knot. 
R  (c) Make sure that the minimum distance is correct: 
R  - 2.5 mm (0.0984 in.) min. for pipes in the same routing, 
R  - 6 mm (0.2362 in.) min. for pipes in different routings. 
R  (d) Apply BONDING AND ADHESIVE COMPOUNDS (Material No. 08-004) on the 
R  reef knot and the ends of the lacing tape. 
R  (e) Make the identification mark with identification tape ABS0653-05 
R  or NSA0144-4 or with white/red paint resistant to hydraulic 
R  fluid. 
R  (2) Installation of bumpers and spacers between pipes. 
R  (Ref. Fig. 203/TASK 20-23-14-991-003) 
R  NOTE : Install bumpers or spacers to prevent vibration and chafing:____ 
R  - when the distance between fixed clamps is too long and, 
R  - to maintain a minimum distance between two pipes. 
R  This method is applicable for tension free installations. 
R  (a) Apply a layer of BONDING AND ADHESIVE COMPOUNDS (Material No. 08-
R  004) on one pipe. 
R  (b) Install an applicable bumper NSA5586 (or a spacer NSA5527) 
R  between the two pipes.

 Installation of Lacing Tape on Pipe Runs Figure 202/TASK 20-23-14-991-002
 1EFF : 1 1R 1CES  ALL  1 11 1 20-23-14 Page 205 May 01/99

R R  Installation of Bumpers and Spacers between Pipes Figure 203/TASK 20-23-14-991-003- 12 (SHEET 1)
 1EFF : 1 1 1CES  ALL  1 111 20-23-14 Page 206 Feb 01/99

R R  Installation of Bumpers and Spacers between Pipes Figure 203/TASK 20-23-14-991-003- 22 (SHEET 2)
 1EFF : 1 1 1CES  ALL  1 111 20-23-14 Page 207 Feb 01/99

R  Identification of spacers 
R  ----------------------------------------
R  | Length of spacer | Spacer P/N | 
R  | in. | mm | | 
R  |-----------|---------|----------------| 
R  | 0.142 | 3.6 | NSA5527-03-07 | 
R  | 0.190 | 4.83 | NSA5527-03-04 | 
R  | 0.25 | 6.35 | NSA5527-03-03 | 
R  | 0.312 | 7.93 | NSA5527-03-05 | 
R  | 0.375 | 9.52 | NSA5527-03-06 | 
R  | 0.453 | 11.5 | NSA5527-03-16 | 
R  | 0.5 | 12.7 | NSA5527-03-01 | 
R  | 0.551 | 14 | NSA5527-03-14 | 
R  | 0.598 | 15.2 | NSA5527-03-02 | 
R  | 0.669 | 17 | NSA5527-03-15 | 
R  | 0.748 | 19 | NSA5527-03-12 | 
R  | 0.787 | 20 | NSA5527-03-08 | 
R  | 0.827 | 21 | NSA5527-03-13 | 
R  | 0.886 | 22.5 | NSA5527-03-09 | 
R  | 0.925 | 23.5 | NSA5527-03-11 | 
R  | 1.831 | 46.5 | NSA5527-03-10 | 
R  ----------------------------------------
R  (c) Install a cable tie NSA935401 over the layer of adhesive and the 
R  bumper (or the spacer): 
R  - NSA935401-08 for pipe DIA. 1"1/2 (38.1 mm) and 5/8 (15.87 mm), 
R  - NSA935401-05 for other pipe diameters. 
R  NOTE : You must use the applicable tool to install the cable tie.____ 
R  The cable tie must be sufficiently tight around the pipe 
R  but must not cause damage to the pipe (kinks or other 
R  damage). 
R  (d) Make the identification mark with identification tape ABS0653-05 
R  or NSA0144-4 or with white/red paint resistant to hydraulic 
R  fluid. 
R  (3) Installation of clamps or lacing tape to prevent chafing of pipes 
R  (Ref. Fig. 204/TASK 20-23-14-991-004) 
R  NOTE : We recommend that you use clamps in areas where there can be____ 
R  stress and/or vibration.

 Installation of Clamps or Lacing Tape Figure 204/TASK 20-23-14-991-004
 1EFF : 1 1R 1CES  ALL  1 11 1 20-23-14 Page 209 May 01/99

 (a) Installation of clamps.

 1 Find the applicable clamp installation for:_ - the location of the pipes, - the distance between the pipes. Identification of P-clamps ------------------------------------------------
R R R R R R  | Tube | Tube DIA. | P-clamp P/N | | size | in. | mm | | |------|----------|---------|------------------| | -04 | 1/4 | 6.35 | NSA5516CA06NJ | | -06 | 3/8 | 9.525 | NSA5516CA10NJ | | -08 | 1/2 | 12.70 | NSA5516CA14NJ | | -10 | 5/8 | 15.875 | NSA5516CA18NJ | | -12 | 3/4 | 19.05 | NSA5516CA23NJ | | -16 | 1 | 25.40 | NSA5516CA29NJ (*)| | -20 | 1-1/4 | 31.75 | N/A | | -24 | 1-1/2 | 38.10 | N/A | ------------------------------------------------
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：A320飛機維護手冊 AMM STANDARD PRACTICES-AIRFRAME(57)