Soft Control Panel
Message Color Triggering condition
NOT IN [filter] DATABASE White In the MAP DATA Page, when the OANS does not find a map element in the map element list. [filter] refers to a type of map element (i.e. runway, taxiway, stand, others).
NOT IN [filter] DATABASE White In the AIRPORT SELECTION Page, when the OANS does not find an airport in the airports list. [filter] refers to ICAO, IATA or CITY NAME.
DATABASE CYCLE NOT VALID White In the STATUS page, when the Airport Data Base is outdated.
SET PLAN MODE White When the flight crew selects ARC or ROSE NAV mode and PLAN mode is required (i.e. manually selected airport not in FMS flight plan).
5.1.4. OANS CONTROLS
5.1.4.1. EFIS CP RANGE SELECTOR
When in ZOOM position, the EFIS CP range selector activates the OANS display on ND. The OANS display is available with the following range 5 NM, 2 NM, 1 NM, 0.5 NM, 0.2 NM. These four ranges are available by rotating the selector counter-clockwise from the ZOOM position (5NM).
The activation and display of OANS are independent on both sides (Captain, First Officer). Each flight crewmember controls the OANS display on his own ND.
5.1.4.2. EFIS CP ND DISPLAY MODE
The OANS display on ND is available in ARC, ROSE NAV and PLAN modes. These modes remain consistent with current ND definition when OANS is active.
ARC mode
The aircraft symbol is fixed at the bottom of the screen. The Airport Moving Map moves according to the aircraft heading and its position.
The Airport Moving Map is orientated in true or magnetic reference according to the TRUE/MAG push-button setting.
ROSE NAV mode
The aircraft symbol is fixed and centered on the screen. The Airport Moving Map moves according to the aircraft heading and its position.
The Airport Moving Map is orientated in true or magnetic reference according to the TRUE/MAG push-button setting.
PLAN mode
The airport map is fixed, centered on the Map Reference Point at the time of the PLAN mode selection, and orientated towards to the true north.
The aircraft symbol moves according to its current heading and position.
5.1.4.3. KCCU
The flight crew uses the KCCU to interact with the MFD and the ND. The flight crew uses the track ball and the click button to move the airport map.
5.1.4.4. MOVE FUNCTION
The MOVE function uses the drag technique. Press down the KCCU click button and drag with the KCCU trackball to move the airport map.
The MOVE function is available in ARC, ROSE NAV or PLAN mode for three minutes. However, in PLAN mode, the displacement is limited: the center of the background at the time of pressing down the KCCU click button shall remain on the screen.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：getting to grips with surveillance(82)
