曝光臺 注意防騙 網曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

(d) Remove the Spacers  (03-090), the Screws (03-110), the Washers (03-120) and the Spacers (03-100).
(e) Remove the Screws (03-150), (03-190), the Washers (03-160), (03-200), the Switches (03-140), (03-180), the Shim (03-170) and the Blades (03-130).
(f)  Remove the Screws (03-220), (03-250), the Cam (03-210), the Washer (03-230), the Cam (03-240), and the Washer (03-260).
(g) Remove the Screws (03-280) and the Support (03-270).
Page 3004
(h) Collect the Recopy Set Assembly (03-290) for disassembly.
(i) Collect the Motor (03-610) for disassembly. Subtask 21-53-12-040-007-A01
(9) Disassembly of the Recopy Set Assembly (01-290)
(a)
Remove the Screws (03-310) and the Plate (03-300).

(b)
Remove the Bearings (03-320).

(c)
Remove:

- the Spacer (03-340) with the Gear (03-350) with the Spacer (03-360) with the Shaft (03-330)
- or the Gear Assembly (03-370).
(d) Remove:
- the Spacer (03-410) with the Gear (03-400) with the Spacer (03-390) with the Shaft (03-380)
- or the Gear Assembly (03-420).
(e) Remove:
- the Spacer (03-460) with the Gear (03-450) with the Spacer (03-340) with the Shaft (03-430)
- or the Gear Assembly (03-470).
(f)  
Remove the Bearings (03-480).

(g)
Remove the Screws (03-500), the Washers (03-510) and the Spacers (03-490).

(h)
Remove the Spacers (03-520) and (03-530).

(i)  
Remove the Screws (03-550), the Washers (03-560) and the Spacers (03-540).

(j)  
Remove the Screws (03-580), the Tabs (03-590), the Equipped Potentiometer (03-570) and the Plate (03-600).

Subtask 21-53-12-040-008-A01
(10) Disassembly of the Motor (03-610A)
CAUTION: BE CAREFUL TO THE ELECTRICAL WIRES WHEN YOU CUT THE SLEEVES OR WHEN YOU REMOVE THE ELECTROMAGNETIC BRAKE AND ROTOR ASSEMBLY.
(a)
Remove the Screws (04-020), the Washers (04-030) and the Cover (04-010).

(b)
Remove the Nut (04-050).

(c)
Remove the Disc Brake (04-040), the Brake Framework Assembly (04-060), the Spring (04-070), the Washer (04-080) and the Spacer (04-090).

(d)
Remove the Screws (04-110), the Washers (04-120) and the Coil Assembly (04-100).

Page 3005
21-53-12  JUN 15/10
(e)
If necessary disconnect the electrical wires from the Coil Assembly (04-100).

(f)  
Remove the Retaining Ring (04-130) and the Ball Bearing (04-140) from the Coil Assembly (04-100).

NOTE: (refer to TASK 21-53-12-300-803-A01) for replacement of the bearing.

(g)
Remove the Screws (04-180), the Flange (04-170) and the Seal (04-160).

(h)
Remove the Rotor Assembly (04-150) from the Stator Crankcase Assembly (04-240).

(i)  
Remove the Washers (04-190) and (04-200).

(j)  
Remove the Ball Bearing (04-210) from the Rotor Assembly (04-150).

NOTE: (refer to TASK 21-53-12-300-803-A01) for replacement of the bearing. Subtask 21-53-12-040-009-A01
(11) Disassembly of the Motor (03-610B)
CAUTION: BE CAREFUL TO THE ELECTRICAL WIRES WHEN YOU CUT THE SLEEVES OR WHEN YOU REMOVE THE ELECTROMAGNETIC BRAKE AND ROTOR ASSEMBLY.
(a)
Remove the Screws (05-020), the Washers (05-030) and the Cover (05-010).

(b)
Remove the Nut (05-050).

(c)
Remove the Disc Brake (05-040), the Brake Framework Assembly (05-060), the Spring (05-070), the Washer (05-080) and the Spacer (05-090).

(d)
Remove the Screws (05-110), the Washers (05-120) and the Coil Assembly (05-100).

(e)
If necessary disconnect the electrical wires from the Coil Assembly (05-100).

(f)  
Remove the Screws (05-140), the Flange (05-130) and the ball Bearing (05-150) from the Coil Assembly (05-100).
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：LIEBHERR-AEROSPACE TOULOUSE SAS COMPONENT MAINTENANCE MANUAL(24)