7.
 BUSHING/PIN

5. BUSHING/ RETAINER
LOWER GIMBAL
B-B

Stabilizer Trim Upper and Lower Gimbal Wear Limits Figure 602 (Sheet 1)
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-41-14
 ALL  ú ú 01 Page 605 ú Jun 20/91
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL

NO. INDEX 1  RETAINER BUSHING PART NAME DIM. OD ID  INCHES MAXIMUM (mm) MINIMUM INCHES DIAMETER DESIGN LIMITS (mm) 1.3100 (33.274) 1.3110 (33.299) 1.3130 (33.350) 1.3120 (33.325)  WEAR LIMITS WEAR INCHES DIMENSION PERMITTED (mm) 1.3092 (33.254) 1.3160 (33.426)  INCHES CLEARANCE DIAMETER MAXIMUM (mm) 0.0050 (0.127)  REPLACE WORN PART  REPAIR WORN PART X  INSTR REPAIR 1 
2  BUSHING RETAINER ID OD  1.3130 (33.350) 1.3140 (33.376) 1.3100 (33.274) 1.3110 (33.299)  1.3157 (33.419) 1.3087 (33.241)  0.0070 (0.178)  X  X  1 
3  GIMBAL BALLSCREW OD ID  1.5602 (39.629) 1.5607 (39.642) 1.5577 (39.566) 1.5592 (39.604)  1.5622 (39.680) 1.5562 (39.527)  0.0060 (0.152)  X X 
4  BUSHING RETAINER OD ID  1.4995 (38.087) 1.5005 (38.113) 1.4940 (37.948) 1.4945 (37.960)  1.5040 (38.202) 1.4910 (37.871)  0.0130 (0.330)  X  X  1 
5  BUSHING RETAINER OD ID  1.4995 (38.087) 1.5005 (38.113) 1.4940 (37.948) 1.4945 (37.960)  1.5010 (38.125) 1.4935 (37.935)  0.0075 (0.191)  X  X  1 
6  BUSHING PIN OD ID  1.1250 (28.575) 1.1265 (28.613) 1.1235 (28.537) 1.1240 (28.550)  1.1270 (28.626) 1.1230 (28.524)  0.0040 (0.102)  X  X  1 
7  BUSHING PIN OD ID  1.1250 (28.575) 1.1265 (28.613) 1.1235 1.1240 (28.550)(28.537)  1.1280 (28.651) 1.1220 (28.499)  0.0060 (0.152)  X  X  1 
12  RETAINER SAFETY PIN OD ID  1.0000 (25.400) 1.0030 (25.476) 0.9960 (25.298) 0.9980 (25.349)  1.0030 (25.476) 0.9960 (25.298)  0.0070 (0.178)  X X 

REFER TO COMPONENT MAINTENANCE MANUAL FOR REPAIR INSTRUCTIONS.
Stabilizer Trim Upper and Lower Gimbal Wear Limits
Figure 602 (Sheet 2)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-41-14
 ALL  ú ú 01 Page 606 ú Jan 28/02
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
F98022
A
757
MAINTENANCE MANUAL

DESIGN LIMIT DIMENSIONS
WEAR LIMIT DIMENSIONS
INDEX
BUSHING

CLEARANCE BUSHING REPAIR
PART NAME
CLEARANCE
NO.
FLANGE
(REF) FLANGE INSTR
MIN
MAX MIN MAX
MAX MIN
INCHES
INCHES INCHES INCHES
INCHES INCHES
(mm)
(mm) (mm) (mm)
(mm) (mm)
8
BALLNUT/BUSHING
0.032
0.062
0.064
0.069
0.100
0.045
2
REPLACE WORN
(0.813)
(1.575)
(1.626)
(1.753)
(2.540)
(1.143)
BUSHING
2
9
BUSHING/BUSHING
0.041
0.081
0.131
0.136
0.120
0.100
2
REPLACE WORN
(1.041)
(2.057)
(3.327)
(3.454)
(3.048)
(2.540)
BUSHING
2
10
BUSHING/BUSHING
0.010
0.059
0.055
0.060
0.099
0.045
2
REPLACE WORN
(0.254)
(1.499)
(1.397)
(1.524)
(2.515)
(1.143)
BUSHING
2
11
BUSHING/BUSHING
0.022
0.057
0.055
0.060
0.072
0.045
2
REPLACE WORN
(0.559)
(1.448)
(1.397)
(1.524)
(1.829)
(1.143)
BUSHING
2

REPLACE THE WORN BUSHING WHEN THE BUSHING FLANGE IS AT ITS MINIMUM WEAR LIMIT.
Stabilizer Trim Upper and Lower Gimbal Wear Limits
Figure 602 (Sheet 3)

EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 27-41-14
 ALL  ú
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 飛行操縱 FLIGHT CONTROLS 4(80)