757 MAINTENANCE MANUAL
 B. Procedure
 S 824-009
 (1)
Align the seat with the screw holes and install the screws.

 S 214-010

 (2)  
Examine the attendant-seat-restraint attachment and the inertia reel as follows:

 (a)  
Engage the attendant-restraint end fittings to the anchor points.

 (b)  
Replace the back cushions and the head rest. Make sure there is sufficient clearance (approximately 0.25 inch) between the head rest and the shoulder harness for free movement of the shoulder harness.

 (c)  
Quickly pull on the shoulder harness and make sure that the inertia reel locks.

 S 424-030
 (3)  Engage the seat return springs.
 TASK 25-25-02-214-012
 4.  Examine the Attendant-Seat-Restraint Attachment and the Inertia Reel____________________________________________________________________
 A. Access
 (1)  Location Zones
 200 Upper Half of Fuselage

 B. Procedure
 S 214-013
 (1)  Examine the attendant-seat-restraint attachment and the inertia reel as follows:
 (a)  
Remove and keep the back cushions and the headrest.

 (b)  
Engage the attendant-restraint end fittings to the anchor points.

 (c)  
Replace the back cushions and the head rest. Make sure there is sufficient clearance (approximately 0.25 inch) between the head rest and the shoulder harness for free movement of the shoulder harness.

 (d)  
Quickly pull on the shoulder harness and make sure the inertia reel locks.

 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-25-02
 ALL  ú ú 01 Page 403 ú Sep 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757 MAINTENANCE MANUAL
 FLOOR COVERING - REMOVAL/INSTALLATION
_____________________________________
 1.  General_______
 A. This procedure contains four tasks:
 (1)  
The first task is the procedure to remove the carpet from the passenger cabin.

 (2)  
The second task is the procedure to install the carpet to the passenger cabin.

 (3)  
The third task is the procedure to remove and install the carpet at the sidewall.

 (4)  
The fourth task is the procedure to remove and install the floor mat at the doorway.

 TASK 25-27-01-004-001
 2.  Remove the Passenger Cabin Carpet (Fig. 401)_________________________________
 A. References
 (1)  
AMM 25-24-02/401, Closets

 (2)  
AMM 25-25-01/201, Passenger Seats

 (3)  
AMM 53-01-01/401, Floor Panel - Removal/Installation

 B. Access
 (1)  Location Zone
 200 Upper Half of Fuselage

 C. Procedure
 S 024-002
 (1)  
Remove the passenger seats if it is necessary (AMM 25-25-01/201)

 S 024-003

 (2)  
Remove the closet if it is necessary (AMM 25-24-02/401)

 S 024-063

 (3)  
Pull up on the carpet edges to release the carpet from the doubleback tape.

 (4)  
Remove the carpet.

 S 824-004

 (5)  
If you remove more than one carpet, make a mark on the carpet to identify the initial position of the carpet.

 S 024-065
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-27-01
 ALL  ú ú 01 Page 401 ú Jan 20/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A
757
MAINTENANCE MANUAL

CARPET
SIDEWALL CARPET BUTT JOINT (EXAMPLE)

FLOOR PANEL
TAPE
CARPET BUTT JOINT (EXAMPLE) Carpet Figure 401
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 25-27-01
 ALL  ú ú 01 Page 402 ú Mar 20/90
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 1(71)