(d)
B00042 PRC Deck Cleaner

 (3)
Plastic Cleaners

 (a)
B00710 Meguiare Mirror Glaze

 (b)
B00702 Dustless

 (c)
Cleaning Compound - P-P-560

 (4)
Solvents

 (a)
B00069 Methyl Chloroform (1-1-1

 trichloroethane) 1) Inhibisol - Westsafe 2) B00070 Chlorothene NU

 (b)  
B00148 Methyl Ethyl Ketone (MEK) -TT-M-261

 (c)  
B00093 Tetrachloroethylene (perchloroethylene), technical grade - O-T-236

 (d)
B00037 Freon TF

 (5)
Metal Polishes

 (a)
B00700 Met-All

 (b)
B00701 Brilliant Shine

 D. References
 (1) AMM 12-16-03/301, Passenger Compartment Windows
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 25-00-00
 ALL  ú ú 01 Page 703 ú Jan 20/98
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

 (2)  AMM 25-00-00/801, Equipment/Furnishing
 E. Access
 (1)  Location Zones
 200 Upper Half of the Fuselage

 F. Procedure - Prepare to Clean
 S 847-002
 (1)  Unless you are told differently, mix the detergent you will use as follows:
 (a)
Mix one part Spraywhite E to 10 parts water (by volume).

 (b)  
Mix one part Orvus WA Paste to 30 parts water (by volume).

 (c)  
Mix one part Clean Quick to 64 parts water (by volume).

 (d)  
Mix one part Glo Do-All Formula to 30 parts water (by volume).

 (e)  
Mix one part SE-700 to 20 parts water (by
 volume).

 G. Procedure - Clean Opaque Plastic and Painted Surfaces (where applicable)
 NOTE: Use foam and a vacuum cleaner to remove the unwanted materials
____ from the perforated or acoustic surfaces. If you cannot use foam and a vacuum cleaner, use moist cloths or sponges. If the cloths or sponges are soaked, too much fluid will go through the perforations and openings.
 S 117-003
 (1) To clean a small area on the surface, do the steps that follow:
 (a)  Lift the loose unwanted material with a wiper.
 NOTE: Do not rub or push the unwanted material into the
____ textured or perforated surfaces, or the joints.
 (b)  
Apply mixed detergent to the dirty area with a spray bottle or a moist sponge.

 (c)  
Lightly rub the area with a wiper.

 NOTE: For textured surfaces, remove unwanted materials from
____ recesses with a soft fiber brush.
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
 25-00-00
 ALL  ú ú 01 Page 704 ú May 28/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
A

757
MAINTENANCE MANUAL

 (d)  
Remove the detergent with a sponge that is moist with clean water.

 (e)  
Dry the area with a clean wiper. Rub the surface in a straight line movement. If the area stays dirty, do the steps that follow:

 WARNING: DO NOT GET SOLVENTS IN YOUR MOUTH, OR YOUR EYES, OR
_______ ON YOUR SKIN. DO NOT BREATH THE FUMES FROM SOLVENTS. SOLVENTS ARE HAZARDOUS MATERIALS. REFER TO PRODUCT MATERIAL SAFETY DATA SHEETS (MSDS) AND LOCAL REQUIREMENTS FOR PROPER HANDLING PROCEDURES.
 1) Carefully rub the dirty area with wiper that is moist with Freon TF, Isopropyl Alcohol, or Ethyl Alcohol. 2) Do the steps above to remove the solvent with detergent.
 S 117-004
 (2)  To clean all of the surface, do the steps that follow:
 (a)  
Apply the detergent you mixed to the surface with a sponge or a spray bottle. Let the detergent stay on the surface for 1/2 to 2 minutes.

 (b)  
Rub the surface with a cloth that is moist with clean water.

 (c)  
Remove the detergent with a clean wiper that is soaked with clean water.

 (d)  
Dry the surface with a clean, dry cloth.

 S 117-005
 (3)  To clean a ceiling panel that is installed, do the steps that follow:
　
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：757 AMM 飛機維護手冊 EQUIPMENT/FURNISHINGS 1(6)