(a)
Remove the three bolts which attach the housing of the pressure relief valve to the housing of the main oil filter.
(b)
Remove the housing of the pressure relief valve from the housing of the main oil filter.
(c)
Remove the packings from the housing of the pressure relief valve.
S 034-030-N00
(5) Install the protection covers.
TASK 79-21-07-404-005-N00
3. Install the Oil System Pressure (Regulator) Relief Valve (Fig. 401)
________________________________________________________
A. Consumable Materials
(1)
D00390 Oil - Engine
B.
Equipment
(1)
M303, M305, or M307 Bergen Mechanical Crimper
Bergen Cable Technologies Inc
170 Gregg St
P.O. Box 1300
Lodi, NJ 07644-9982
(2)
G02332 Ferrule, Safety Cable (P05-292)
(3)
G02334 Lockwire, (P05-289) 0.032 inch (0.813 mm) - AS3214-02
(4)
G02335 Cable, Safety (P05-291)
C.
References
(1)
12-13-03/301, Engine - Servicing (Oil Replenishing)
(2)
71-00-00/501, Power Plant
(3)
71-11-04/201, Fan Cowl Panels
(4)
71-11-06/201, Core Cowl Panels
(5)
78-31-00/201, Thrust Reverser System
(6)
IPC 79-21-06 Fig. 1
D.
Access
(1)
Location Zone 412 Engine 1 - Main Gearbox Fwd Face 8 o'clock 422 Engine 2 - Main Gearbox Fwd Face 8 o'clock 432 Engine 3 - Main Gearbox Fwd Face 8 o'clock 442 Engine 4 - Main Gearbox Fwd Face 8 o'clock
(2)
Access Panel
415 Left Thrust Reverser Half - Engine 1
425 Left Thrust Reverser Half - Engine 2
435 Left Thrust Reverser Half - Engine 3
445 Left Thrust Reverser Half - Engine 4
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-07
ALL ú ú N01 Page 404 ú Feb 18/00
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
E. Procedure
S 424-022-N00
(1) If it is necessary, install the housing of the pressure relief valve with the steps that follow:
(a)
Remove the protection covers.
(b)
Lubricate the packings for the housing with enigne oil.
(c)
Install the packings in the housing.
(d)
Install the housing into the port on the housing of the main oil filter.
(e)
Lubricate the threads of the bolts, which attach the housing, with the antigalling compound.
(f)
Attach the housing with the bolts.
1) Tighten the bolts to 125-140 pound-inches (14.123-15.818 newton-meters).
S 644-012-N00
(2)
Lubricate the new packing for the pressure relief valve with engine oil.
S 434-006-N00
(3)
Install the packing in the groove of the pressure relief valve.
S 644-013-N00
(4)
Lubricate the packing for the plug with engine oil.
S 434-007-N00
(5)
Install the packing to the plug.
S 434-023-N00
(6)
Install the spring to the plug.
S 644-024-N00
(7)
Lubricate the threads of the plug with engine oil.
S 434-025-N00
(8)
Install the spring and the plug into the housing.
(a) Tighten the plug to 675-750 pound-inches (73.440-84.738 newton-meters).
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-21-07
ALL ú ú N01 Page 405 ú Jun 10/97
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
(b)
Install the lockwire or safety cable and safety cable ferrule to the plug.
中國航空網 m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 滑油 OIL(61)
