曝光臺 注意防騙 網(wǎng)曝天貓店富美金盛家居專營店坑蒙拐騙欺詐消費者

BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
(b) If you find oil leakage around the oil tank and the gearbox interface, remove the oil tank (Ref 79-11-01/401): 1) Visually examine the oil tank and the gearbox mounting surfaces for cracks. a) If you find cracks in the oil tank, replace it (Ref 79-11-01/401). b) If you find cracks in the gearbox, replace the engine (Ref 71-00-02/401).
 c)  If there are no cracks in the oil tank or the gearbox, install the oil tank with new packings (Ref 79-11-01/401).
 (c) If you find oil leakage around the mounting flange of the oil quantity transmitter, remove the transmitter. 1) Visually examine the mounting surfaces of the transmitter and the oil tank for cracks. a) If you find cracks in the transmitter, replace it (Ref 79-31-01/401). b) If you find cracks in the oil tank, replace it (Ref 79-11-01/401).
 c)  If there are no cracks in the tank or the transmitter, install the transmitter with a new packing (Ref 79-31-01/401).
 (d)  If you find oil leakage around the oil cap flange, the sump connector, or the filler valve, remove the applicable item. 1) Visually examine the mounting surfaces for cracks.
 a)  If you find cracks in a filler neck item, replace the item (Ref 79-11-01/401). b) If you find cracks in the tank, replace it (Ref 79-11-01/401). c) If there are no cracks in the tank or the filler neck, install the items with new packings (Ref 79-11-01/401).
 (e) If you find oil leakage around the mounting flange of the oil level gage, remove the gage. 1) Visually examine the mounting surfaces of the oil level gage and the oil tank for cracks. a) If you find cracks in the tank, replace it (Ref 79-11-01/401).
 b)  If you find cracks in the oil level gage, or if the packing is damaged, replace the gage or the packing as follows:
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 79-11-01
 ALL  ú ú N01 Page 603 ú Oct 10/90
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES/MAINTENANCE MANUAL ////////////////////////
~.......................................................
 | 1| Lubricate the new packing for the oil level gage| |

|
| | with engine oil. |
 .........................................................
 | 2| Install the packing on the oil level gage. |
 .........................................................
 | 3| Lubricate the threads of the bolt, which attaches| |

|
| | the oil level gage, with engine oil. |
 .........................................................
 | 4| Install the oil level gage in the tank with the| |

|
| | bolts. |
 .........................................................
 | 5| Tighten the bolts to 32-36 pound-inches| |

|
| | (3.6-4.1 newton meters). |
 2..…....................................................1

 (f)  If you find oil leakage from the oil tank, visually make sure the crack or the hole is the source of the leak. 1) If the crack or the hole is the source of the leak, replace
 the oil tank (Ref 79-11-01/401).
 S 416-004-N00
 (3)  Close the left thrust reverser half (Ref 78-31-00/201).
 EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú

 79-11-01
 ALL  ú ú N01 Page 604 ú Oct 10/96
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
OIL TANK CAP - MAINTENANCE PRACTICES
____________________________________
 1.  General_______
 A.  This procedure gives the tasks to open the oil tank cap, to replace the packing if necessary and to close it. The oil tank cap is referred to as the cap assembly in this procedure.
 B.  You can get to the cap assembly through the oil fill access. The oil fill access is on the left half of the thrust reverser, at the 8 o'clock position.
 TASK 79-11-03-002-002-N00
 2.  Open the Cap Assembly (Fig. 201)_____________________
 A.  References
 (1)  
AIPC 79-11-03, Fig. 1

 (2)  
AMM 78-31-00/201, Thrust Reverser System

 B.  
Access

 (1)  
　
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 滑油 OIL(20)