(2)
Access Panel
417A Oil Fill Access - Engine 1
427A Oil Fill Access - Engine 2
437A Oil Fill Access - Engine 3
447A Oil Fill Access - Engine 4
C.
Procedure
S 042-004-N00
WARNING:_______DO THE THRUST REVERSER DEACTIVATION TASK. THIS TASK PREVENTS THE OPERATION OF THE THRUST REVERSER. ACCIDENTAL OPERATION OF THE REVERSER CAN CAUSE INJURY TO PERSONS OR DAMAGE TO EQUIPMENT.
(1)
Do this task: "Thrust Reverser Deactivation for Ground Maintenance" (AMM 78-31-00/201).
(2)
Open the Oil Fill Access.
S 012-001-N00
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-11-03
ALL ú ú N01 Page 201 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
////////////////////////A / PW4000 SERIES /747-400 / ENGINES /MAINTENANCE MANUAL ////////////////////////
HANDLE IN THE LOCKED POSITION
OIL TANK OIL FILL ACCESS
FWD SEE A B
HANDLE
ENGINES WITH PWSB 79-65
CLOSE
RECESS
CAP ASSEMBLY
MANUAL FILL (L2) OIL OUT 3
MANUAL FILL (L2) OIL OUT 3
HANDLE - LIFTED AND IN THE OPEN POSITION
OPEN LEFT CORE
PACKING OIL TANK
CAP ASSEMBLY COWL
LUG
OIL FILL ACCESS
HANDLE IN THE LOCKED POSITION
FILLER NECK FWD SLOT (3 LOCATIONS)
ENGINES WITHOUT PWSB 79-65
SEQUENCE TO OPEN THE OIL TANK CAP
SEQUENCE TO CLOSE THE OIL TANK CAP A
B
Oil Tank Cap
Figure 201
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-11-03
ALL ú ú N01 Page 202 ú Jun 10/94
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
S 032-003-N00
WARNING:_______DO NOT LET HOT OIL TOUCH YOU. LET 5 MINUTES GO BY AFTER AN ENGINE SHUTDOWN TO LET THE OIL SYSTEM PRESSURE GO TO ZERO. IF YOU OPEN THE OIL SYSTEM WHEN IT HAS PRESSURE, A SPRAY OF HOT OIL CAN BURN YOU.
WARNING:_______DO NOT TOUCH THE OIL SYSTEM PARTS IF THE ENGINE IS HOT. THESE PARTS STAY HOTTER THAN OTHER ENGINE PARTS AFTER AN ENGINE SHUTDOWN. IF YOU TOUCH AN OIL SYSTEM PART WHEN THE ENGINE IS HOT, IT CAN BURN YOU.
WARNING:_______DO NOT LET THE OIL TOUCH YOUR SKIN FOR A LONG TIME. YOU CAN ABSORB THE POISONOUS MATERIALS FROM THE OIL THROUGH YOUR SKIN.
CAUTION:_______IMMEDIATELY CLEAN ALL OIL THAT FALLS ON THE ENGINE PARTS. THE OIL CAN CAUSE DAMAGE TO THE PAINT AND SOME RUBBER PARTS.
(3) Open the cap assembly.
(a)
Lift the handle on the cap assembly.
(b)
Turn the handle 45 degrees counterclockwise to the OPEN position.
(c)
Remove the cap assembly from the filler neck.
(d)
Install a protection cap.
(e)
Examine the packing for cuts, nicks, or tears.
(f)
Remove and Discard the packing (6) if you find it damaged.
S 212-021-N00
(4) Examine the cap assembly for leaks around the handle.
(a) If you see that there were leaks around the handle, do the "Cap Assembly Repair" task (Ref par. 3.).
TASK 79-11-03-302-007-N00
3. Cap Assembly Repair (Fig. 202)___________________
A. General
(1)
This task replaces the packing on the lock of the cap assembly.
(2)
You must disassemble the cap assembly to replace the packing.
B.
Consumable Materials
(1)
D00390 Oil - Engine
C.
References
(1)
AIPC 79-11-03, Fig. 1
EFFECTIVITYùùùùùùùùùùùùùùùùùùùùùùùùùùùùùù. ú
79-11-03
ALL ú ú N01 Page 203 ú Feb 15/99
BOEING PROPRIETARY - Copyright (C) - Unpublished Work - See title page for details.
中國航空網(wǎng) m.k6050.com
航空翻譯 www.aviation.cn
本文鏈接地址：747-400 AMM 飛機維護手冊 滑油 OIL(21)
